Software DownloadmeinbergOS Changelogs
Durch die Veröffentlichung der Changelogs aus dem meinbergOS-Projekt werden Sie ständig über Änderungen, Updates und Bugfixes unserer microSync-Firmware informiert.
meinbergOS Changelog
| Version | ID | Art | Changelog |
|---|---|---|---|
| 2025.10.1 | 27827 | Task | Updated to Linux Kernel 6.6.111 |
| 2025.10.1 | 28213 | Task | Updated Yocto to walnascar 5.0.13 |
| 2025.10.1 | 27408 | Task | PTP Track Hound: Update to v2.2.0 |
| 2025.10.1 | 26141 | Task | IEC 61850: Updated libiec61850 to v1.6.1 |
| 2025.10.1 | 25953 | Task | mbgOSWizard: Improved usability and allow configuration of microSync XS |
| 2025.10.1 | 24349 | Task | Cutoff support for configuration changes and state monitoring via Meinberg Device Manager |
| 2025.10.1 | 19376 | Security Feature | Web: Added support for Automatic Certificate Management Environment (ACME) |
| 2025.10.1 | 18805 | Security Feature | API: Added support for Bearer (Token) Authentication |
| 2025.10.1 | 20745 | Feature | Added hash validation when restoring an externally saved configuration backup |
| 2025.10.1 | 25960 | Feature | Added badwords file to diagnostic file |
| 2025.10.1 | 26487 | Feature | Added event for availability of internal module updates |
| 2025.10.1 | 25202 | Feature | IEC 61850: Provide default dataset and report control block on ICD/CID file generation |
| 2025.10.0 | 25595 | Bug | Ensure the system time is always synchronized to the reference clock |
| 2025.10.1 | 27327 | Bug | Split up hostname and domain name configuration options |
| 2025.10.1 | 25950 | Bug | Fixed default IP configuration of microSync XS (lan0) |
| 2025.10.1 | 25959 | Bug | Fixed validation of badwords file (allow more than one line) |
| 2025.10.1 | 25929 | Bug | Prevent timeouts in diagnostic file creation |
| 2025.10.1 | 26582 | Bug | Invert offset in recently added initial Time-of-Day synchronization option for NTP |
| 2025.10.1 | 29187 | Bug | Fixed/Unified maximum length of new user passwords (31 characters) |
| 2025.10.1 | 26151 | Feature | PTP: Overwrite quality and traceability parameters if simulation mode is active |
| 2025.10.1 | 27910 | Feature | PTP: Allow to sync phase and frequency to free running Master and retransmit free running time of day |
| 2025.10.1 | 20740 | Feature | PTP: Allow to respond to Multicast Messages from other subnets |
| 2025.10.1 | 20464 | Feature | PTP: Back up stack logfile on unexpected service restart |
| 2025.10.1 | 27845 | Bug | PTP: Changed default Announce Interval for SMPTE profile to 0 (1/s) |
| 2025.10.1 | 26084 | Bug | PTP: Correctly fill timeOfPreviousJam and previousJamLocalOffset in SMPTE TLV |
| 2025.10.1 | 28012 | Bug | SyncE: Make reception of ESMC messages more robust |
| 2025.10.1 | 27762 | Bug | Ensure the SyncE state is always up-to-date |
| 2025.10.1 | 25573 | Feature | microShell: Improve request performance |
| 2025.10.1 | 24551 | Feature | microShell: Improve handling of lists of values |
| 2025.10.1 | 23858 | Feature | microShell: Add terminal color support |
| 2025.10.1 | 21624 | Feature | microShell: Prompt before overwriting multitine strings from the command line |
| 2025.10.1 | 21620 | Feature | microShell: Only show log usage notes once per session |
| 2025.10.1 | 21618 | Feature | microShell: Show human-readable names for list elements |
| 2025.10.1 | 21616 | Feature | microShell: Use less technical terminology |
| 2025.10.1 | 21615 | Feature | microShell: Make various commands context-sensitive |
| 2025.10.1 | 28606 | Bug | microShell: Prevent hidden parameters from appearing after discarding changes |
| 2025.10.1 | 28328 | Bug | microShell: Fix setting the gateway of a newly created virtual interface |
| 2025.10.1 | 27913 | Bug | microShell: Show actual parameter IDs in get output |
| 2025.10.1 | 27912 | Bug | microShell: Prevent crashes when navigating newly created list items |
| 2025.10.1 | 26119 | Bug | microShell: Prevent deleted list items from reappearing |
| 2025.10.1 | 20370 | Feature | Web: Added Startup-Wizard for initial device setup |
| 2025.10.1 | 20228 | Feature | Web: Added warning banner if ntpd is not running |
| 2025.10.1 | 20225 | Feature | Web: Improved state indicators on Reference State overview |
| 2025.10.1 | 25108 | Feature | Web: Show bias information in Reference State overview |
| 2025.10.1 | 27452 | Feature | Web: Added slider for configuration of Sync and Delay Request Interval |
| 2025.10.1 | 27241 | Feature | Web: Added slider for configuration of NTP Min and Max Poll Interval |
| 2025.10.1 | 21720 | Feature | Web: Show which permission is missing if configuration page is read-only |
| 2025.10.1 | 21583 | Feature | Web: Added hostname to title of timed out Web UI |
| 2025.10.1 | 20727 | Feature | Web: Added notification about existing config changes before saving a configuration |
| 2025.10.1 | 17562 | Feature | Web: Moved optional config options for external authentication methods to advanced sections |
| 2025.10.1 | 26052 | Feature | Web: Added warning that COM0 should not be connected while performing a clock module update |
| 2025.10.1 | 10166 | Bug | Web: Fixed missing device image on I/O Ports State page with missing config permissions |
| 2025.10.1 | 29225 | Bug | Web: Improved error message when trying to install an invalid or corrupted firmware update |
| 2025.10.1 | 25818 | Bug | Web: Fixed search for API references |
| 2025.10.1 | 24566 | Bug | Web: Fixed several layout problems on mobile devices |
| 2024.12.4 | 25469 | Task | Updated to Linux Kernel 6.6.96 |
| 2024.12.4 | 25468 | Task | Updated Yocto to scarthgap 5.0.10 |
| 2024.12.4 | 25774 | Task | Added firmware update for clock module GSR183 (v1.21) |
| 2024.12.4 | 25794 | Task | Updated MMS server to 1.74.175 and ICD-Generator to 1.2.2 |
| 2024.12.4 | 25665 | Security Feature | Added support for public/private key signed/verified firmware updates |
| 2024.12.4 | 25666 | Security Feature | Force immediate password change on initial login with default credentials |
| 2024.12.4 | 25826 | Security Bug | Prohibit login for any external user with username > 31 characters |
| 2024.12.4 | 25470 | Feature | Added support for GPSANTv2 and GNMANTv2 antenna details |
| 2024.12.4 | 21682 | Feature | Added option to change oscillator DAC calibration value via Web UI and REST API |
| 2024.12.4 | 25471 | Feature | Web: Added button for ICD file download to IEC61850 configuration page |
| 2024.12.4 | 22338 | Feature | Web: Improved naming of state LEDs in I/O port view |
| 2024.12.4 | 25599 | Feature | Added web server (nginx) access.log to diagnostics file |
| 2024.12.4 | 25598 | Bug | Fixed output of uptime command line tool |
| 2024.12.4 | 25472 | Bug | Fixed configuration option for serial string (COM) port of microSync XS |
| 2024.12.4 | 25780 | Bug | Fixed potential system crash after deletion of local user accounts |
| 2024.12.4 | 25736 | Bug | PTP: Added cleanup of esync logfile if PTP Track Hound is enabled while no PTP instance is running |
| 2024.12.4 | 25561 | Bug | PTP Track Hound: Allow using a microSync as Remote Capture instance without applied license key |
| 2024.12.4 | 25575 | Bug | Web: Fixed reappearing GNS systems after removal via the Clock configuration page |
| 2024.12.4 | 25565 | Bug | Web: Immediately apply changed user permissions in the Web Interface (client-side) |
| 2024.12.4 | 25562 | Bug | Web: Fixed whole UI becoming read-only once a read-only config page (due to permissions) has been visited |
| 2024.12.4 | 25107 | Bug | Web: Fixed disappearing hint for available clock update on tab change on Firmware page |
| 2024.12.4 | 23773 | Bug | Web: Remove previously uploaded files after failed license upgrades |
| 2024.12.3 | 25132 | Task | Updated to Linux Kernel 6.6.92 |
| 2024.12.3 | 24330 | Feature | Added debug logfile for LDAP service to diagnostics file |
| 2024.12.3 | 24935 | Bug | PTP: Correctly set UTC offset valid flag when synchronizing to PTP with disabled Boundary Clock mode |
| 2024.12.3 | 25098 | Bug | Fixed reset of bad words list within password rules config after removal of a user account |
| 2024.12.3 | 25020 | Bug | Web: Disable button for IEC61850 CID file download if CID file does not exist |
| 2024.12.2 | 24242 | Task | Updated to Linux Kernel 6.6.89 |
| 2024.12.2 | 24352 | Task | Updated Yocto to scarthgap 5.0.9 |
| 2024.12.2 | 24250 | Task | Updated MMS server to 1.74.173 and ICD-Generator to 1.1.2 |
| 2024.12.2 | 24252 | Task | Backported support for fast lock feature for GPS180/GNS181/GNS181UC clock modules |
| 2024.12.2 | 24575 | Feature | PTP: Added option to disable BC mode |
| 2024.12.2 | 23948 | Bug | PTP: Fixed support for PTPv1 request intervals < 0 (1/sec) |
| 2024.12.2 | 23950 | Bug | PTP: Fixed behaviour in BC mode if own priorities are better than a foreign Grandmaster |
| 2024.12.2 | 24546 | Bug | PTP: Fixed system crash when trying to create Unicast Master and Slave instance on the same virtual interface |
| 2024.12.2 | 23954 | Bug | PTP Track Hound: Fixed reoccuring service restarts if more than ~15 instances have been detected |
| 2024.12.2 | 23626 | Feature | Web: Added informational batch for statistics only reference sources |
| 2024.12.2 | 21772 | Feature | Web: Hide number of satellites in view/used in dashboard if no antenna is connected |
| 2024.12.2 | 24506 | Bug | Web: Fixed LDAP login for users with ID > 100 |
| 2024.12.2 | 21945 | Bug | Web: Return HTTP 422 instead of 500 when trying to delete currently assigned user level |
| 2024.12.2 | 24548 | Bug | Web: Fixed seldom appearing freeze of Maintenance page on microSync broadcast systems |
| 2024.12.2 | 23772 | Bug | Web: Do not allow initiation of firmware update via topbar dropdown if maximum number of installed versions is reached |
| 2024.12.2 | 23627 | Bug | Web: Immediately hide update availability banner after module update completion |
| 2024.12.2 | 24527 | Bug | Fixed counter within user state for active Web/API/microShell sessions |
| 2024.12.1 | 22341 | Task | Updated to Linux Kernel 6.6.79 |
| 2024.12.1 | 22340 | Task | Updated Yocto to scarthgap 5.0.7 |
| 2024.12.1 | 21864 | Bug | Fixed fibre connection problems when Auto-Negotiation is disabled on opposite side |
| 2024.12.1 | 21736 | Feature | Added support for the new oscillator fast lock feature |
| 2024.12.1 | 21704 | Security Feature | Added new password validity event (for password warnings or expirations) |
| 2024.12.1 | 21898 | Bug | Added support for transmission of domains for external authentication (with '@' as delimiter) |
| 2024.12.1 | 21774 | Bug | NTP: Forbid polling intervals > 5 (32s) as client of external NTP servers |
| 2024.12.1 | 21957 | Feature | PTP: Added support for AUTOSAR profile (slave-only) |
| 2024.12.1 | 23774 | Bug | PTP: Fixed faulty validation error after reboot with PTP instance(s) with virtual interface "None" |
| 2024.12.1 | 23349 | Bug | PTP: Fixed transmission of duplicate ATOI TLV in C37.238 2017 profile |
| 2024.12.1 | 23084 | Bug | PTP: Transmit stepsRemoved of 0 (instead of 1) if running as Grandmaster |
| 2024.12.1 | 22764 | Bug | PTP Track Hound: Fixed application crash when analyzing path trace TLV(s) |
| 2024.12.1 | 20635 | Feature | microShell: Add shortcuts for state/configuration counterparts |
| 2024.12.1 | 21675 | Feature | microShell: Improve help text for changePassword command |
| 2024.12.1 | 21441 | Feature | Web: Added support for license extensions/updates |
| 2024.12.1 | 21866 | Feature | Web: Added network link indicators to I/O port view |
| 2024.12.1 | 21555 | Feature | Web: Added security query before discarding changes between running and startup configuration |
| 2024.12.1 | 20754 | Feature | Web: Added warning indication to "ACQUIRING" clock state on references state page |
| 2024.12.1 | 20736 | Feature | Web: Added quick links for firmware installation and diagnostic file download to header menu |
| 2024.12.1 | 23221 | Bug | Web: Fixed automatic update of satellites statistics tile in dashboard |
| 2024.12.1 | 23082 | Bug | Web: Maintain unsaved configuration changes while adding users/user levels |
| 2024.12.1 | 22762 | Bug | Web: Hide unequipped I/O ports from the selection box of the I/O port view |
| 2024.12.1 | 22114 | Bug | Web: Automatically hide sections that are empty due to lack of user permissions |
| 2024.12.1 | 22093 | Bug | Web: Disable all input elements that may not be changed by the user |
| 2024.12.1 | 21942 | Bug | Web: Fixed UI behaviour when leaving the browser tab while installing a firmware update |
| 2024.12.1 | 21312 | Bug | Web: Allow to downgrade module firmware if installed version is newer than enclosed version |
| 2024.12.1 | 21274 | Bug | Web: Hide system |
| 2024.12.1 | 21073 | Bug | Web: Added state information about bonding interfaces to header menu |
| 2024.12.1 | 20603 | Bug | Web: Removed "Serial Terminal" text from I/O port view of microSyncXS |
| 2024.12.1 | 19987 | Bug | Web: Do not collapse reference source entries after enabling them on references configuration page |
| 2024.12.1 | 21113 | Bug | Web/API: Correctly set the HSTS header when returning 502 (bad gateway) error |
| 2024.12.1 | 23352 | Bug | API: Removed empty property "caCertificates" from /state/modules/clk1/system |
| 2024.12.1 | 21749 | Bug | API: Fixed return code and error message when trying to change the password of an internal system user |
| 2024.12.0 | 17987 | Task | Updated to Linux Kernel 6.6.64 |
| 2024.12.0 | 17985 | Task | Updated Yocto to scarthgap 5.0.6 |
| 2024.12.0 | 17416 | Feature | Added support for PTP Track Hound on lan2 and lan3 |
| 2024.12.0 | 18915 | Feature | Added support for PTPv1 (PL-C required) |
| 2024.12.0 | 17438 | Feature | Added early access version of meinbergOS CLI (microShell v0.1.0) |
| 2024.12.0 | 18057 | Feature | Added support for IEC 61850 MMS |
| 2024.12.0 | 10142 | Feature | Assign each user account to one specific user level and derive channels and permissions |
| 2024.12.0 | 651 | Feature | Added support for secure user password requirements |
| 2024.12.0 | 21613 | Bug | Disallow user account names that are in use or reserved for internal system users |
| 2024.12.0 | 21661 | Bug | Disallow user level IDs that are in use or reserved for internal system user groups |
| 2024.12.0 | 19403 | Feature | Added option to use NTP only for initial Time-of-Day synchronization |
| 2024.12.0 | 18283 | Feature | Added category (System/NTP/PTP/...) for events |
| 2024.12.0 | 17819 | Feature | Added option to completely disable events |
| 2024.12.0 | 17818 | Feature | Added option to acknowledge events after their occurence |
| 2024.12.0 | 18290 | Feature | Added option use the Alarm LED as an indicator for specific events |
| 2024.12.0 | 18704 | Feature | Added dedicated event log for a complete history of occured events |
| 2024.12.0 | 18284 | Feature | Added new event for any SyncE input state change |
| 2024.12.0 | 17679 | Feature | Added new event for any reference source state change |
| 2024.12.0 | 17671 | Feature | Added new events for SSL certificate installation and expiration |
| 2024.12.0 | 18370 | Feature | Added support for on-site configuration backup |
| 2024.12.0 | 20743 | Bug | Added basic JSON validity check before trying to restore a config backup file |
| 2024.12.0 | 20226 | Task | Reduced maximum number of installed firmware releases to four (disk space) |
| 2024.12.0 | 19407 | Task | Show useful device information when logging in via SSH/Terminal |
| 2024.12.0 | 11254 | Feature | Web: Improved overall performance by rebuilding the complete UI as single Vue SPA |
| 2024.12.0 | 19921 | Feature | Web: Open same submenu when switching between Configuration and State whenever possible |
| 2024.12.0 | 17439 | Feature | Web: Added filter textbox for system log |
| 2024.12.0 | 21281 | Task | Web: Do not show recommended Meinberg Device Manager (mbgdevman) version any longer |
| 2024.12.0 | 20466 | Bug | Web: Use consistent format for all error messages |
| 2024.12.0 | 19201 | Task | Web: Improved usability for configuration of reference source selection options |
| 2024.12.0 | 21517 | Bug | Web: Prevent installation of SSL/TLS certificates with encrypted private key |
| 2024.12.0 | 19772 | Bug | API: Fixed crash on not allowed PUT request to properties within /startup |
| 2024.12.0 | 21684 | Bug | API: Fixed return code on POST requests to LDAP commands (start/stop/restart) if LDAP is disabled |
| 2024.05.8 | 23233 | Bug | PTP: Transmit Steps Removed of 0 (instead of 1) if running as 802.1AS Grandmaster |
| 2024.05.8 | 23223 | Task | Updated Yocto to kirkstone 4.0.25 |
| 2024.05.8 | 22142 | Task | Added firmware updates for clock modules GPS180/GNS181/GNS181UC (v2.91) and GSR183-IMS (v1.18) |
| 2024.05.8 | 19406 | Task | Updated to Linux Kernel 6.1.128 |
| 2024.05.8 | 18107 | Bug | Web: Refresh alert timeout after consecutive configuration changes |
| 2024.05.7 | 18898 | Feature | Finalized support for new microSync XS |
| 2024.05.7 | 18622 | Feature | Added firmware compatibility checks for microSync TRX/XS |
| 2024.05.7 | 20287 | Security Bug | Web: Do not allow deactivated users (password expiration) to use the Web Interface |
| 2024.05.7 | 20452 | Bug | PTP: Fixed recurring service restarts due to congested log directory |
| 2024.05.7 | 19937 | Bug | PTP: Fixed transfer of Parent Dataset and Steps Removed in Boundary Clock operation |
| 2024.05.7 | 19927 | Bug | PTP: Fixed 802.1AS neighbor rate ratio boundary for compatibility with ptp4l |
| 2024.05.7 | 19807 | Bug | PTP: Fixed disregarded delay asymmetry compensation |
| 2024.05.7 | 19932 | Task | Updated Yocto to kirkstone 4.0.23 |
| 2024.05.6 | 19789 | Bug | PTP: Fixed reoccuring daemon restarts if using log level other than Error (0) |
| 2024.05.6 | 19758 | Bug | PTP: Fixed multicast reception on 100 MBit/s network links |
| 2024.05.6 | 19605 | Bug | Web: Fixed internal server error in Monitoring configuration for users with very limited permissions |
| 2024.05.6 | 19443 | Bug | SNMP: Fixed mbgOsReceiverState syntax in MEINBERG-OS.mib |
| 2024.05.6 | 19367 | Bug | Display: Fixed displayed time always being behind by one second |
| 2024.05.6 | 19350 | Bug | Web: Make sure to always show correlating data points in satellites statistics (per system and combined) |
| 2024.05.6 | 19348 | Bug | Web: Fixed typo in dashboard view (GNNS -> GNSS) |
| 2024.05.6 | 19135 | Bug | Web: Show correct license information in PTP interface state |
| 2024.05.6 | 18965 | Bug | Display: Fixed intermittent loss of network information when using DHCP |
| 2024.05.6 | 18911 | Feature | Web: Improved naming of power supplies in system state (List Item 0 -> Power Supply 1) |
| 2024.05.6 | 19404 | Task | Updated Yocto to kirkstone 4.0.21 |
| 2024.05.5 | 18714 | Bug | PTP: Allow to use ARB timescale and always enable Path Trace TLV in 802.1AS |
| 2024.05.5 | 18636 | Bug | Web: Hide Time of Day Source and Phase Source options for frequency-only reference sources |
| 2024.05.5 | 18623 | Bug | Forbid direct downgrades to meinbergOS versions < 2022.05.0 |
| 2024.05.5 | 18608 | Security Bug | Do not allow remote authentication for users who exist as local account |
| 2024.05.5 | 18580 | Bug | NTP: Restart service on DNS configuration changes |
| 2024.05.5 | 18567 | Bug | Fixed faulty resolv.conf if DHCP is disabled and DNS configuration is changed in a single configuration step |
| 2024.05.5 | 18557 | Task | Updated Yocto to kirkstone 4.0.20 |
| 2024.05.5 | 18539 | Bug | Web: Fixed wrong maximum number of configurable GNSS types with GNS-UC receivers |
| 2024.05.5 | 18487 | Task | Updated to Linux Kernel 6.1.99 |
| 2024.05.5 | 18427 | Task | Disable uvicorn (Web Interface) access log syslog entries |
| 2024.05.5 | 18231 | Feature | Web: Automatically expand collapsible menus with less than three rows of content |
| 2024.05.5 | 17876 | Bug | Do not store empty statistics records for disabled reference sources |
| 2024.05.5 | 11792 | Bug | REST API: Fixed overall performance and possibly occuring crashes when receiving many requests in parrallel |
| 2024.05.4 | 18508 | Bug | Prevent display timeouts and unresponsiveness when using DHCP with very short lease time |
| 2024.05.4 | 18490 | Security Bug | Prevent web interface from becoming unresponsive when sending API requests from a non-existent user |
| 2024.05.4 | 18217 | Feature | Web: Statistics: Increase the mouse over area of individual datapoints |
| 2024.05.4 | 8985 | Security Bug | Fix memory leak in web server |
| 2024.05.3 | 18489 | Bug | Fixed once per second reoccuring antenna state event |
| 2024.05.2 | 18456 | Task | Updated leap second file for ntpd |
| 2024.05.2 | 17729 | Feature | Added hostnames of external NTP servers to their belonging state objects |
| 2024.05.2 | 18460 | Bug | Fixed reboot persistence of network/gateway address configuration via front panel |
| 2024.05.2 | 18405 | Bug | Fixed hostname in DHCP requests if FQDN is configured |
| 2024.05.2 | 18223 | Bug | Web: Do not show "Clock" state button if user lacks permissions to view it |
| 2024.05.2 | 18222 | Bug | Web: Automatically enable users network state permissions when enabling PTP read/write permissions |
| 2024.05.2 | 18198 | Bug | Web: Hide meinbergOS version and serial number if user lacks permissions (instead of showing "None") |
| 2024.05.2 | 18404 | Bug | Fixed potential deadlock when using DHCP with a short lease time |
| 2024.05.1 | 18220 | Feature | Show current IP addresses in Network tile of Web UI dashboard |
| 2024.05.1 | 18178 | Bug | Fixed missing config file read/write of NTP "Wait Time" |
| 2024.05.1 | 18051 | Bug | Ensure all event configuration is saved |
| 2024.05.1 | 18046 | Feature | Show Antenna Position Score in the dashboard of the Web UI |
| 2024.05.1 | 18039 | Feature | Allow configuration of A/V Sync Outputs (Time Zone) via Web UI |
| 2024.05.1 | 18037 | Feature | Added most commonly used Time Zones as Presets for Time Zone configuration via Web UI |
| 2024.05.1 | 17969 | Feature | Added traceability for "Logout" and "Authentication Failure" events |
| 2024.05.1 | 17934 | Feature | Added support for multiple new Tri-Level Sync Blackburst formats (microSync Broadcast) |
| 2024.05.1 | 17775 | Feature | PTP: Added configuration option "Minimum Quality" as best possible values for Clock Class/Clock Accuracy/Clock Variance |
| 2024.05.1 | 17758 | Feature | Added satellites statistics to Web UI |
| 2024.05.1 | 17466 | Feature | Added independent event for "Oscillator State" (adjusted/not adjusted) |
| 2024.05.1 | 17275 | Feature | Added independent event for "Antenna State" (connected/not connected) |
| 2024.05.1 | 660 | Feature | Show current state of Clock LEDs (Fail/Ant/Nav/Init) in I/O Port View of Web UI |
| 2024.05.0 | 17910 | Feature | Added warning banner if trying to downgrade to a firmware version below OSV |
| 2024.05.0 | 17776 | Feature | PTP Power Profiles are capable to cross-reference each other in redundant setups while in holdover |
| 2024.05.0 | 17625 | Feature | Show session timeout countdown in top navigation bar |
| 2024.05.0 | 17398 | Feature | Added monitoring configuration and state to Web UI (Events/SNMP/Syslog) |
| 2024.05.0 | 17104 | Bug | IEEE 802.3 PTP instances do not require a VIF (IP address) any longer |
| 2024.05.0 | 17069 | Feature | Added support for dual PTP timeReceivers (lan2 + lan3) |
| 2024.05.0 | 17068 | Feature | Use native PRP Linux kernel module for redundant interface setups |
| 2024.05.0 | 16931 | Bug | Fixed state handling in PTP Multicast Auto Mode with PTP as exclusive reference source |
| 2024.05.0 | 16721 | Feature | Added clock configuration to Web UI (Initialization/Output Behavior/Time Zone) |
| 2024.05.0 | 16618 | Bug | Fixed offset calculation in IEEE 802.1AS timeReceiver mode |
| 2024.05.0 | 16168 | Bug | Do not show unequipped power supplies in the device view |
| 2024.05.0 | 15345 | Feature | Added support for mbgNMS device discovery |
| 2024.05.0 | 15336 | Feature | Prevent transmission of network packets with incorrect MAC address at device startup |
| 2024.05.0 | 14454 | Task | Replaced dhclient by dhcpcd |
| 2024.05.0 | 14315 | Feature | Write syslog message when oscillator state changes to "warmed up" |
| 2024.05.0 | 14082 | Feature | Added reference source statistics to Web UI |
| 2024.05.0 | 13770 | Bug | Make sure to always send SyncE ESMC messages exactly once per second |
| 2024.05.0 | 12900 | Task | Updated to Linux Kernel 6.1.69 |
| 2024.05.0 | 12220 | Feature | Add on-site factory reset functionality via USB drive |
| 2024.05.0 | 11640 | Feature | Restore leap second information if GNSS antenna is not connected after power cycle |
| 2024.05.0 | 11359 | Feature | Added support for configuration backup and restore via Web UI |
| 2024.05.0 | 11358 | Feature | Allow for management of certificates via Web UI (CA Certificates/SSL/TLS-Certificate) |
| 2024.05.0 | 11334 | Feature | Added support for module firmware updates via Web UI |
| 2024.05.0 | 11144 | Feature | Support PTP via native PRP (IEEE 802.3 only; lan2 + lan3); including support for NTP on the same interfaces |
| 2024.05.0 | 8731 | Feature | General accessibility improvements in the Web UI |
| 2024.05.0 | 8542 | Feature | Add new command line tool "fwmgmt" for managing firmware versions |
| 2024.05.0 | 4994 | Feature | Added power supply monitoring via Web UI and REST API and SNMP |
| 2024.05.0 | 359 | Feature | Added support for external authentication (LDAP/Radius/TACACS+) |
| 2022.05.8 | 17858 | Bug | Update to v1.11 for GSR183 clock module |
| 2022.05.8 | 17863 | Bug | Fixed front display firmware update procedure (microSyncRX) |
| 2022.05.7 | 16471 | Feature | Updated Yocto to dunfell 3.1.31 |
| 2022.05.7 | 16970 | Feature | Added support for new clock modules GPS183 / GNS183 / GNS183_UC (GSR183) |
| 2022.05.7 | 4537 | Feature | Added support for factory reset via CLI (reset_to_factory) |
| 2022.05.7 | 16507 | Feature | Added Timecode Option config for Blackburst Inputs/Outputs and LTC Outputs |
| 2022.05.7 | 16612 | Feature | Added Daily Jam Time config option for NTSC Blackburst inputs |
| 2022.05.7 | 10196 | Feature | Web: Show banner if a validation failed due to an error on another config page |
| 2022.05.7 | 16580 | Security Bug | Updated libssh to 0.9.8 (addressing CVE-2023-48795 / Terrapin attacks) |
| 2022.05.7 | 16532 | Security Bug | Patched Dropbear (addressing CVE-2023-48795 / Terrapin attacks) |
| 2022.05.7 | 15246 | Security Bug | Patched Busybox (addressing CVE-2022-48174 / Stack overflow) |
| 2022.05.7 | 16531 | Bug | Added memory leak detection with automatic restarts for third-party services (i.e. ntpd / nginx / uvicorn) |
| 2022.05.7 | 16427 | Bug | Prevent installation of the same module firmware more than once per system boot |
| 2022.05.7 | 16298 | Bug | Do not auto-activate firmware after installation failure; improved error message |
| 2022.05.7 | 16917 | Bug | Harmonized NTP root dispersion with LANTIME devices |
| 2022.05.7 | 16537 | Bug | PTP: Fixed tolerance for 802.1AS Neighbor Rate Ratio during startup phase |
| 2022.05.7 | 14256 | Bug | Web: Always show Current UTC Offset of Time Properties Data Set |
| 2022.05.7 | 14084 | Bug | Web: Added missing NTP state in Dashboard for users with state-only permissions |
| 2022.05.7 | 12327 | Bug | Web: Automatically remove config-write permissions together with config-read permissions |
| 2022.05.7 | 11799 | Bug | Web: Do not show hint about soon expiring password if the password has already expired |
| 2022.05.7 | 16960 | Bug | Web/REST API: Show PTP clock accuracy 0xFE as "Unknown (0xFE)" instead of "invalid" |
| 2022.05.6 | 15891 | Feature | Web/REST API: Improved textual representation of PTP message intervals |
| 2022.05.6 | 15197 | Feature | Enabled leap smearing option for ntpd |
| 2022.05.6 | 15161 | Feature | Updated Yocto to dunfell 3.1.29 |
| 2022.05.6 | 15111 | Feature | Web: Added notice banner for up to now missing Web UI features |
| 2022.05.6 | 14443 | Feature | Write syslog message for "Oscillator warmed up" event |
| 2022.05.6 | 12997 | Feature | Updated leap second file for ntpd |
| 2022.05.6 | 16219 | Bug | PTP: Update values of parent dataset also in Passive state |
| 2022.05.6 | 16211 | Bug | PTP: Allow free configuration of Priority 1 and Priority 2 in IEC 61850-9-3 Utility Profile |
| 2022.05.6 | 16170 | Bug | Improved speed and reliability of internal module firmware updates |
| 2022.05.6 | 16140 | Bug | PTP: Fixed PTP HW clock adjustment during dynamic port state changes |
| 2022.05.6 | 16139 | Bug | Fixed evaluation of estimated time quality after source re-attachment |
| 2022.05.6 | 15797 | Bug | PTP: Aligned clock class values in power profiles to actual ref clock offset |
| 2022.05.6 | 15369 | Bug | Web/REST API: Added support for new operation modes for video outputs |
| 2022.05.6 | 14446 | Bug | Fixed missing noctification on Leap Second announcement |
| 2022.05.6 | 14444 | Bug | PTP: Reset drift of PTP HW clock in Listening state |
| 2022.05.6 | 14402 | Bug | Web/REST API: Fixed HTTP errors when deleting user account(s) using an account other than "admin" |
| 2022.05.6 | 14162 | Bug | Fixed synchronization to NTP as only available reference source after reboot |
| 2022.05.6 | 11361 | Bug | Updated clock firmware to v2.84 and VSG181 firmware to v1.19 |
| 2022.05.5 | 11673 | Feature | Offer LTC encoding options in WEB UI |
| 2022.05.5 | 14197 | Bug | Fixed leap indicator info on NTP state page in WEB UI |
| 2022.05.5 | 14196 | Bug | Improved leap second handling of PTP output |
| 2022.05.5 | 14165 | Bug | Add waiting time of 10s before changing estimated time quality |
| 2022.05.5 | 14019 | Bug | Fill dynamic fields in SyncMetadata TLV withinn the SMPTE ST 2059-2 profile |
| 2022.05.5 | 14016 | Bug | Use PTP clock class 6 in ITU-T. G.8275.1 also if PPS is used as reference |
| 2022.05.5 | 13779 | Bug | Fixed multiple displays of 'is Master' flag in WEB UI |
| 2022.05.5 | 13464 | Bug | Do not disable SyncE ESMC messages if QL-DNU is received |
| 2022.05.5 | 12994 | Bug | Check for VLAN usage in WEB UI if PTP profile C37.238-2011 is used |
| 2022.05.5 | 12807 | Bug | Offer optional use of Alternate Time Offset Indicator TLV for all PTP profiles |
| 2022.05.5 | 12315 | Bug | Keep WEB UI reachability after discarding password change |
| 2022.05.5 | 12226 | Bug | Avoid error message in WEB UI after initial PTP configuration with default SMPTE profile settings |
| 2022.05.5 | 11800 | Bug | Notify API user in case the password of the user expired |
| 2022.05.5 | 11119 | Bug | Update order of reference sources after enable/disable an entry |
| 2022.05.4 | 12806 | Bug | Fixed Delay Asymmetry config option for PTP |
| 2022.05.4 | 12436 | Bug | Security fix in API for users with expired passwords |
| 2022.05.4 | 12239 | Bug | Improved startup when using PTP as reference |
| 2022.05.4 | 11281 | Security Bug | Updated OpenSSL to 1.1.1s |
| 2022.05.4 | 12885 | Bug | Fixed support mail address on info pages |
| 2022.05.4 | 12838 | Security Bug | Updated Yocto to dunfell 3.1.21 |
| 2022.05.4 | 12836 | Bug | Avoid crash after authentication failure via device manager |
| 2022.05.3 | 11668 | Bug | Web: Fixed LED description and antenna connector in visualization |
| 2022.05.3 | 11619 | Bug | Fixed writing I/OPort config via Device Manager |
| 2022.05.3 | 11543 | Bug | Fixed firmware update progress messages |
| 2022.05.3 | 11539 | Bug | Web/REST API: Fixed textual representation of unknown PTP clock accuracy (0xFE) |
| 2022.05.3 | 11520 | Bug | Web/REST API: Fixed configuration of DCF-like programmable outputs |
| 2022.05.3 | 11512 | Bug | Avoid display showing timeout or booting after startup |
| 2022.05.3 | 11472 | Bug | Renamed IPv6 link local addresses from "lanX:autoconf" to "lanX:linklocal" |
| 2022.05.3 | 11471 | Bug | Do not overwrite statically configured DNS servers and search domains when using DHCP |
| 2022.05.3 | 11467 | Bug | Web: List PTP unicast slaves starting from 1 |
| 2022.05.3 | 11466 | Feature | Web/REST API: Provide more detailed command errors |
| 2022.05.3 | 11463 | Bug | Do not overwrite static IPv6 addresses when assigning a new address via DHCPv6 |
| 2022.05.3 | 11444 | Bug | Web: Fixed label in user level creation modal |
| 2022.05.3 | 11442 | Bug | Web: Improved missing CSRF token error handling on login page |
| 2022.05.3 | 11438 | Bug | Fixed restoring startup config with user who doesn't have write permissions in all subjects |
| 2022.05.3 | 11437 | Bug | Web: Fixed superfluous check boxes in user permission matrix |
| 2022.05.3 | 10281 | Feature | REST API: Added OPTIONS method and Allow header |
| 2022.05.3 | 9688 | Bug | REST API: Made root endpoint available under /api in addition to /api/ |
| 2202.05.2 | 11519 | Bug | Web/REST API: Fixed state of unicast slaves in PTP unicast master mode |
| 2022.05.2 | 11518 | Bug | Web/REST API: Fixed valid range (1-15) for stratum value in NTP orphan mode |
| 2022.05.2 | 11517 | Bug | Web/REST API: Fixed configuration of invalid announce timeout in Unicast Master mode |
| 2022.05.2 | 11473 | Feature | Updated leap second file for ntpd |
| 2022.05.2 | 11458 | Bug | Correctly reset password_doc (day of change) when restoring startup configuration |
| 2022.05.2 | 11451 | Bug | Allow download of currently used SSL certificate via Meinberg Device Manager |
| 2022.05.2 | 11433 | Bug | Fixed import of older config presets via Meinberg Deveice Manager |
| 2022.05.2 | 11428 | Bug | Web: Fixed incorrect redirect after password change |
| 2022.05.2 | 11374 | Bug | PTP: Allow Unicast Mode with default E2E profile |
| 2022.05.2 | 11373 | Bug | Web/REST API: Fixed status of virtual interfaces that have been setup via command line |
| 2022.05.2 | 11372 | Task | Deactivated IPv6 autoconf for all interfaces |
| 2022.05.2 | 11354 | Bug | Fixed configuration of Unicast Master mode |
| 2022.05.2 | 11353 | Bug | Web/REST API: Fixed status of virtual interfaces that have been assigned via DHCPv6 |
| 2022.05.2 | 11335 | Bug | Web/REST API: Fixed incorrect SyncE SSM state information |
| 2022.05.2 | 11333 | Bug | Web: Fixed missing constant configuration options on the IO Ports web page |
| 2022.05.2 | 11330 | Bug | Fixed missing NTP "burst" option if both burst and iburst are active |
| 2022.05.2 | 11329 | Bug | Web/REST API: Fixed NTP restart command |
| 2022.05.2 | 8669 | Bug | Do not generate "Antenna Disconnected" events if GNSS shall not be used as reference source |
| 2022.05.1 | 11325 | Bug | Support RX622 device type in web UI visualization |
| 2022.05.1 | 11279 | Bug | Avoid duplicate bonding interface names in web |
| 2022.05.1 | 11277 | Feature | Added hint in Web UI if interface is member of a bond or PRP group |
| 2022.05.1 | 11271 | Feature | Added GNSS type name on web UI's receiver state page |
| 2022.05.1 | 11269 | Bug | Fixed creation of bonding interfaces |
| 2022.05.1 | 11253 | Bug | Corrected display of DAC values in web UI |
| 2022.05.1 | 8064 | Bug | Set PTP port state to Disabled on link down |
| 2022.05.0 | 11249 | Feature | Introduced REST API |
| 2022.05.0 | 10990 | Bug | PTP: Single FixedQuality Parameters can now be used independent of other FQ parameters |
| 2022.05.0 | 10950 | Task | Updated openSSL to 1.1.1o |
| 2022.05.0 | 10948 | Task | Updated Yocto to Dunfell 3.1.16 |
| 2022.05.0 | 10929 | Task | Info and Status user disabled by default |
| 2022.05.0 | 10266 | Task | Updated Linux kernel version to 4.9.307 |
| 2022.05.0 | 10204 | Bug | Re-calibrated PTP Phy Delays according to connected SFP media type |
| 2022.05.0 | 9241 | Bug | Cleaned-up orphaned peer connections |
| 2022.05.0 | 6727 | Bug | Additional consistency checks on update .ufu files |
| 2022.05.0 | 3676 | Bug | PTP Timestamps are based on UTC if PTP Timescale is configured to Arbitrary |
| 2022.05.0 | 1953 | Bug | Updated libssh to 0.9.6 and removed ssh-rsa algorithm |
| 2022.05.0 | 1905 | Feature | Introduced WEB-based GUI |
| 2020.11.9 | 9035 | Bug | Fixed polling receiver table with SNMP |
| 2020.11.8 | 9389 | Bug | Support reception of PTPv2.1 frames |
| 2020.11.8 | 9388 | Bug | Fixed PTP Layer 2 profiles with high message rates |
| 2020.11.8 | 9379 | Task | Reject broken connection attempt and fixed infinite peer blocking on SSH key exchange |
| 2020.11.8 | 8855 | Bug | Avoid unneccessary kernel debug message |
| 2020.11.7 | 8673 | Bug | Avoid firmware programming of display after each reboot |
| 2020.11.6 | 8544 | Bug | Fixed default settings for clock capabilities |
| 2020.11.5 | 8709 | Task | Updated Linux kernel to 4.9.282 |
| 2020.11.5 | 8708 | Task | Updated Yocto to 3.0.4 |
| 2020.11.5 | 7027 | Task | Updated clock firmware v.2.72 and display firmware v.1.10 |
| 2020.11.5 | 5577 | Feature | Added script to save config as startup config via command line |
| 2020.11.5 | 4058 | Feature | Fixed Prop.Delay Threshold configuration in PTP profile 802.1AS |
| 2020.11.5 | 7403 | Bug | PTP Stack now ignores 2-step flag in 802.1AS profile |
| 2020.11.5 | 6925 | Bug | PTP Stack could have a high CPU load in L2 mode |
| 2020.11.5 | 5581 | Bug | Enabled the fixed quality configuration option in PTP |
| 2020.11.5 | 4260 | Bug | Fixed IP address configuration via display |
| 2020.11.5 | 4253 | Bug | Fixed IP address status via display (req. Display v.1.10) |
| 2020.11.4 | 4385 | Task | Support USB Host Phy with low power management |
| 2020.11.4 | 4277 | Task | Support for OEM plug-in board |
| 2020.11.4 | 4275 | Task | Updated Clock Firmware to 2.69.0 |
| 2020.11.4 | 4270 | Feature | Adjusted meinbergOS update procedure - account for OS Target info in .ufu file |
| 2020.11.3 | 4261 | Task | Updated Clock Firmware to 2.68.0 |
| 2020.11.2 | 4254 | Task | New firmware version 2.67.0 for reference clocks |
| 2020.11.2 | 4244 | Task | Fixed L2 Cache controller driver |
| 2020.11.2 | 4196 | Bug | Added missing parameters in self-signed certificate |
| 2020.11.2 | 4034 | Feature | Improved incremental update procedure |
| 2020.11.1 | 3952 | Bug | Settings for broadcast outputs are now saved persistantly |
| 2020.11.1 | 3894 | Bug | Oscillator type was sometimes displayed as *Unkown* |
| 2020.11.0 | 3592 | Feature | Added log files of PTP stack to diagnostic file |
| 2020.11.0 | 2739 | Feature | Support for microSync Broadcast models 7xx/8xx |
| 2020.11.0 | 1309 | Feature | Support NTP as a reference source for the oscillator (req. clock firmware >=2.64.0) |
| 2020.11.0 | 3857 | Bug | Use configured key IDs in ntp.keys file correctly |
| 2020.11.0 | 3675 | Bug | SyncE references are now linked to the corresponding network interface |
| 2020.11.0 | 3511 | Bug | Improved display programming process |
| 2020.11.0 | 3489 | Bug | Avoid misleading timeout messages in display after large time resets |
| 2020.11.0 | 3468 | Bug | Allow time resets of the clock of more than one second during operation |
| 2020.05.6 | 3513 | Bug | Improved robustness of display upgrade procedure |
| 2020.05.5 | 3303 | Feature | Support for model microSyncRX 312 |
| 2020.05.5 | 3334 | Task | Upgraded Display firmware to 1.9 |
| 2020.05.5 | 3459 | Task | New FPGA version 1.0.6 which solves link problems with some switch models |
| 2020.05.5 | 2752 | Bug | Fixed login problems of device manager after network interruptions |
| 2020.05.5 | 2882 | Bug | Display handles interruptions of firmware updates now correctly |
| 2020.05.5 | 3264 | Bug | Rotate log files of PTP stack in case they become too large |
| 2020.05.5 | 3302 | Bug | Do not show messages of missing display if device is not designed to have one |
| 2020.05.5 | 3498 | Bug | Fixed PTP service operating via VLAN interface |
| 2020.05.4 | 2759 | Bug | Allow safe removal of DHCP-controlled interfaces |
| 2020.05.4 | 2748 | Bug | Fixed upgrade process of OLED display |
| 2020.05.4 | 2732 | Bug | Apply network configuration even if default gateway is not reachable via a virtual interface |
| 2020.05.4 | 2568 | Bug | Avoid zero bytes length for json status files |
| 2020.05.3 | 2746 | Feature | Upgraded Display Firmware to v.1.07 |
| 2020.05.2 | 2744 | Feature | Include new Clock Firmware 2.58.0 for GNS-based clocks |
| 2020.05.2 | 2737 | Feature | Updated ntpd to 4.2.8p15 |
| 2020.05.2 | 2660 | Bug | Full Support for IPv6 default router preferences (RFC4191) |
| 2020.05.2 | 2684 | Bug | Set SNMP sysName to empty string if not configured |
| 2020.05.2 | 2700 | Bug | Fixed potential crash of snmpd during PTP configuration while PTP objects are requested |
| 2020.05.2 | 2716 | Bug | Support configuration of priority parameters for PTP profile IEC 61850-9-3 |
| 2020.05.2 | 2723 | Bug | Support notSlave Parameter of ITU profile G.8275.1 correctly |
| 2020.05.1 | 2667 | Bug | Preserve routing information if interface is added to existing bonding group |
| 2020.05.1 | 2664 | Bug | Default Gateway that was set via mbgOSWizard is now perserved after initial Save Operation by the device manager |
| 2020.05.1 | 2647 | Bug | Input reference configuration could not be saved if the device does not support PTP |
| 2020.05.0 | 2592 | Feature | Support for firmware upgrade of front panel display |
| 2020.05.0 | 2570 | Bug | Always update IP status also in DHCP mode |
| 2020.05.0 | 2501 | Feature | Added details to log messages during gateway configuration |
| 2020.05.0 | 2383 | Bug | Correctly calculate hashes in syschecksums.json |
| 2020.05.0 | 2375 | Feature | Support static routes for single host addresses |
| 2020.05.0 | 2300 | Feature | Include output of show-route in diagnostic file |
| 2020.05.0 | 2299 | Feature | Added script show-route to show routing table in readable format |
| 2020.05.0 | 2021 | Feature | "Added event ""System sync state""" |
| 2020.05.0 | 2011 | Bug | Increased syslog message buffer size |
| 2020.05.0 | 1666 | Feature | Make MIB file available for download under /mibs |
| 2020.05.0 | 1366 | Bug | Improved NTP accuracy on LAN0/1 ports |
| 2020.05.0 | 1289 | Bug | Restart ntpd on config changes that trigger time steps in refclocks |
| 2020.05.0 | 1254 | Feature | Added services.json to status files |
| 2020.05.0 | 1249 | Feature | Added ethtool output of all interfaces to diagnostic file |
| 2020.05.0 | 801 | Feature | Log every command in syslog that was executed on shell |
| 2020.05.0 | 786 | Feature | Support for PRP |
| 2020.05.0 | 362 | Feature | Dropped support for automatic device lookup due to security reasons |
| 2020.05.0 | 361 | Bug | Support peer status for NTP in communication between Device Manager and meinbergOS |
| 2020.05.0 | 360 | Feature | Support for extended routing incl. interface specific gateways and static routes |
| 2020.01.3 | 2476 | Bug | Fixed Memory Leak in ntpd when using AES128CMAC keys |
| 2020.01.2 | 1956 | Bug | Avoid crash of management service during specific snmpwalk commands |
| 2020.01.2 | 1896 | Bug | Removed unnecessary PTP debug message |
| 2020.01.2 | 1838 | Bug | Avoid high CPU load during and after a clock firmware upgrade |
| 2020.01.1 | 1843 | Bug | Save IP settings persistentely that have been configured via front display |
| 2020.01.1 | 1848 | Bug | Allow safe upgrade from 2019.08.x to 2020.01.x |
| 2020.01.0 | 1830 | Bug | Updated Leap second file |
| 2020.01.0 | 1789 | Bug | Updated SOC FPGA (v.1.0.5) |
| 2020.01.0 | 656 | Security Feature | updated net-snmp to 5.8 to support new encryption algorithms |
| 2020.01.0 | 1804 | Security Feature | Updated Linux Kernel to version 4.9.210 |
| 2020.01.0 | 750 | Feature | Support status for SyncE |
| 2020.01.0 | 1143 | Feature | Support rescue mode for failed clock firmware updates |
| 2020.01.0 | 1322 | Feature | Support for PTP Profile IEEE C37.238-2017 |
| 2020.01.0 | 1288 | Feature | Support for incoming connections via IPv6 |
| 2020.01.0 | 792 | Feature | Support for front display |
| 2020.01.0 | 1159 | Feature | Support configuration of AES128CMAC keys in ntpd |
| 2020.01.0 | 1085 | Feature | Support configurable network LED link indication |
| 2020.01.0 | 1027 | Feature | Support board revision in system info |
| 2020.01.0 | 358 | Feature | Provide MRS statistics via REST API |
| 2020.01.0 | 1187 | Feature | Created shell script mbgOSWizard.sh for initial IP configuration |
| 2020.01.0 | 582 | Feature | Added tcpdump |
| 2020.01.0 | 639 | Security Bug | Added sudo feature |
| 2020.01.0 | 357 | Feature | Added json based REST API |
| 2020.01.0 | 757 | Feature | Added event for watchdog |
| 2020.01.0 | 674 | Security Bug | Updated dropbear to account for CVE-2018-15599 |
| 2020.01.0 | 679 | Bug | Updated dhClient to 4.4.1 |
| 2020.01.0 | 1278 | Feature | TLV in Power prfiles now contain correct values for alternate time offset |
| 2020.01.0 | 655 | Bug | Syslog entries now entered in correct facilities |
| 2020.01.0 | 1258 | Bug | Set default NTP trust time to 4 days |
| 2020.01.0 | 652 | Bug | Save SNMP engine boots counter persistent |
| 2020.01.0 | 680 | Bug | PTP Stack now waits for assignment of IP address if DHCP is configured |
| 2020.01.0 | 1267 | Bug | Preserve network config after removal of a bonding group |
| 2020.01.0 | 1025 | Feature | Log file of PTP stack was not complete |
| 2020.01.0 | 1264 | Bug | Increased syslog message buffer size |
| 2020.01.0 | 1026 | Bug | Improved robustness of clock firmware updates |
| 2020.01.0 | 859 | Bug | Improved robustness during microSync firmware updates |
| 2020.01.0 | 1690 | Bug | Enforced PTP performance level restrictions |
| 2020.01.0 | 634 | Security Bug | Disabled weak mac algorithm hmac-sha1 in libssh |
| 2020.01.0 | 632 | Security Bug | Disable weak ciphers in dropbear (ssh) |
| 2020.01.0 | 1169 | Bug | Corrected timestamps in status file ntp.json |
| 2020.01.0 | 1270 | Bug | Added label for IPv6 autoconf addresses |
| 2020.01.0 | 1277 | Bug | Account for front LED indication config |
| 2020.01.0 | 676 | Security Bug | Account for BusyBox CVE-2016-6301 & CVE-2015-9261 due to update to 1.30.1 |
| 2019.08.9 | 1175 | Bug | PTP Multicast Auto mode did not work correctly |
| 2019.08.8 | 1168 | Bug | Added Device Tree for microSyncHR311 |
| 2019.08.7 | 1161 | Bug | Production Fix for setting OSV |
| 2019.08.6 | 1111 | Bug | Ref.Time LED will be green also for other sync sources besides GNSS |
| 2019.08.6 | 1135 | Bug | PTP Stacks now supports MTIE TLV for Monitoring requests |
| 2019.08.6 | 1032 | Bug | Improved robustness of receiver firmware upgrade process |
| 2019.08.6 | 1125 | Bug | Broadcast Address was not always set correctly in IP configuration |
| 2019.08.5 | 1004 | Bug | Link Mode State correctly set also with Fiber connection |
| 2019.08.4 | 1011 | Bug | PTP Stack increased log file |
| 2019.08.3 | 1019 | Feature | FPGA Version 1.0.4 and Firmware 2.52.0 |
| 2019.08.2 | 835 | Bug | Avoid crash after removal of PTP instances |
| 2019.08.1 | 799 | Bug | microSync LEDs in I/O Port view is now displayed correctly |
| 2019.08.1 | 861 | Bug | Incremental updates could fail due to memory space problems |
| 2019.08.1 | 809 | Bug | Firmware Upgrade of internal clock module is now working correctly |
| 2019.08.1 | 794 | Bug | Enable LAN ports again after removal of bonding group |
| 2019.08.1 | 797 | Bug | Clock connection was lost sometimes after a management service restart |
| 2019.08.1 | 793 | Bug | Avoid losing the capability to monitor and control running PTP stack instances |
| 2019.08.1 | 813 | Bug | Added sysref.json in diagnostic file |
