Meinberg Radio Clocks the GPS, DCF and NTP Time Server Specialist
Solutions for Time and Frequency Synchronization
Products Support Downloads About Meinberg Contact Search Hier klicken f?tsche Seiten
by Application by Time Source by Form Factor Time Server Product Archive  
spacer

DU35S : LED Large Display DU35S (date/time with seconds display as dotted circle)


LED Large Display DU35S with LED circle round the display for showing the seconds
Image Zoom Image Zoom


LED Large Display DU35S with LED circle round the display for showing the seconds

Large display DU35S with good visibility and 50mm height LED characters, working either as

  • free running clock (with or without programmable changeover in daylight saving)
  • or externally driven display, via serial timestring (RS232 or current loop)


 


 

Key Features

  • 3 Years Warranty RoHS compliant
  • Stand Alone Clock
  • 20mA Interface
  • 50mm LED Display for Time and Date
  • RS232 interface
  • Display for external Clock
  • Cascadable




Back to Top


Characteristics


Display: LED-Matrix Display (7 dots high) for time and date 50mm character height
Without serial synchronization the clock runs on XTAL with an accuracy of ±1·10-5, indicated by LED

Interface: One serial RS232/20mA interface
Data format of interfaces: Baudrate: 9600 Baud
Dataformat: 7E2
1 active/passive 20mA current loop output (selectable)
1 active/passive 20mA current loop input (selectable)
Output string: 32 ASCII characters with date, time and status information
Physical dimensions: 323mm x 323mm x 57mm ( width x height x depth)
Electrical connectors: 1 x 25 pin, 1 x 9 pin DSub female connector
power cord receptacle
Power supply: 85-264VAC (50/60Hz) / 120-375VDC
Backup battery type: In case of supply voltage failure the on-board RTC keeps the time based on XTAL for more than 100 hours
Form Factor: Plastic coated steel sheet case, black (optional: white), IP30 protected
Ambient temperature: 0 ... 50°C / 32 ... 122°F
Humidity: Max. 85%
RoHS-Status of the product: This product is fully RoHS compliant
WEEE status of the product: This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself.

Back to Top


Downloads

 
PDF Documents Please note that only the most recent manual version is available for download. This manual therefore may not be suitable for all product versions.

Software Downloads

  • For drivers, SDKs, tools and utilities, please check our Download area
 




spacer
 Home  | Products  | Top  ]
spacer
Meinberg Funkuhren GmbH & Co. KG
Lange Wand 9
D - 31812 Bad Pyrmont
Contact
Phone: +49 (0) 52 81 / 93 09 - 0
Facsimile: +49 (0) 52 81 / 93 09 - 30
Legal Notice and Privacy Policy | Sitemap
Homepage: http://www.meinberg.de
E-Mail: info@meinberg.de
LED Large Display DU35S