 |
Solutions for Time and Frequency Synchronization |
| Products | Support | Downloads | About Meinberg | Contact | Search |  |
| by Application | by Time Source | by Form Factor | Time Server | Product Archive | ||
 |
|
|
DCF77 Radio Clock - PCI/PCI-X Bus
 The PCI511 is a DCF77 radio clock for synchronization of computers with a PCI or PCI-X slot. It receives the longwave radio time signal from the DCF77 sender located near Frankfurt/Main, Germany.
SNTP Time Server
 M300GPS: NTP Time Server with integrated GPS radio clock and highly stable and precise oscillator.
Timeserver
 Meinberg NTP Products: Time Server, PCI Cards, external Reference Clocks, Displays
Time Synchronisation
 We offer you a wide range of solutions for synchronizing networks of any size
Rackmount Time Server
 LANTIME M600/GPS: PTPv2/IEEE 1588-2008 Grandmaster Clock and NTP Time Server with integrated GPS radio clock.
IPV6 Time server
 The M300/RDT is synchronized by any external Meinberg radio clock (Stratum 1 mode) or up to 7 external NTP time servers (Stratum 2 mode)
IRIG Time Server
 The M300/TCR comes with a built-in TCR module which decodes a IRIG/AFNOR signal from any compatible time code generator.
Timecode Reader
 The TCR51USB is a Timecode Reader in a compact plastic housing - decodes IRIG modulated and unmodulated MEINBERG: Quality Management System
|
Key Features
|
|||||||||||||||||||||||||||||||||||||||
| Display: | LED-Matrix Display (7 dots high) for time and date 50mm character height
Without RF signal the clock runs on XTAL with an accuracy of ±1·10-5, indicated by LED
|
| Interface: | One serial RS232/20mA interface |
| Data format of interfaces: | Baudrate: 9600 Baud Dataformat: 7E2 1 active/passive 20mA current loop output (selectable) 1 active/passive 20mA current loop input (selectable) Output string: 32 ASCII characters with date, time and status information |
| Physical dimensions: | 996mm x 100mm x 60mm ( width x height x depth) |
| Electrical connectors: | 2 x 25-pin DSub female connector RJ-45 Jack (only VP100/20/NET) BNC antenna connector (only VP100/20) power cord receptacle |
| Power supply: | 85-264VAC (50/60Hz) / 120-375VDC |
| Backup battery type: | In case of supply voltage failure the on-board RTC keeps the time based on XTAL for more than 100 hours |
| Form Factor: | Plastic coated steel sheet case, black (optional: white), protection, IP30 protected |
| Ambient temperature: | 0 ... 50°C / 32 ... 122°F |
| Humidity: | Max. 85% |
| Options: | Equipped with a network connector RJ45 in the rear panel and special software the VP100/20 can be used as a Slave Clock for Meinberg NTP Time Server (VP100/20/NET). |
| RoHS-Status of the product: | This product is fully RoHS compliant |
| WEEE status of the product: | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |
Downloads
|
||
|
|
| [ Home | Products | Top ] |
|
