 |
Solutions for Time and Frequency Synchronization |
| Products | Support | Downloads | About Meinberg | Contact | Search |  |
| by Application | by Time Source | by Form Factor | Time Server | Product Archive | ||
 |
|
|
PC Clock
 The IRIG output of the GPS170PCI can be used to synchronize IRIG time code receivers
Clock GPS Time
 This GPS180PEX PCI EXPRESS slot card is the best choice for adding a highly accurate time base to your servers or workstations
IRIG B
 IRIG Time Code Reader and Generators
IRIG Converter
 IRIG Time Code Receiver and Generator for Computers
SNTP Time Server
 M300GPS: NTP Time Server with integrated GPS radio clock and highly stable and precise oscillator.
Rackmount Time Server
 LANTIME M600/GPS: PTPv2/IEEE 1588-2008 Grandmaster Clock and NTP Time Server with integrated GPS radio clock.
Network Time Synchronization
 The public domain software package NTP - Network Time Protocol
Time Synchronisation
 We offer you a wide range of solutions for synchronizing networks of any size MEINBERG: Quality Management System
|
Key Features
|
|||||||||||||||||||||||||||||||||||||||
| Display: | LED-Matrix Display (7 dots high) for time and date 50mm character height
Without RF signal the clock runs on XTAL with an accuracy of ±1·10-5, indicated by LED
|
| Interface: | One serial RS232/20mA interface |
| Data format of interfaces: | Baudrate: 9600 Baud Dataformat: 7E2 1 active/passive 20mA current loop output (selectable) 1 active/passive 20mA current loop input (selectable) Output string: 32 ASCII characters with date, time and status information |
| Physical dimensions: | 323mm x 323mm x 57mm ( width x height x depth) |
| Electrical connectors: | 1 x 25 pin, 1 x 9 pin DSub female connector BNC antenna connector (only DCF77 variant) power cord receptacle |
| Power supply: | 85-264VAC (50/60Hz) / 120-375VDC |
| Backup battery type: | In case of supply voltage failure the on-board RTC keeps the time based on XTAL for more than 100 hours |
| Form Factor: | Plastic coated steel sheet case, black (optional: white), IP30 protected |
| Ambient temperature: | 0 ... 50°C / 32 ... 122°F |
| Humidity: | Max. 85% |
| Options: | Variant DU35K/FDM for displaying mains frequency in combination with mains frequency deviation monitor FDM511 |
| RoHS-Status of the product: | This product is fully RoHS compliant |
| WEEE status of the product: | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |
Downloads
|
||
|
|
| [ Home | Products | Top ] |
|