IMS Modules: Power Supplies, Input Signals and Output Signals for Meinberg IMS - Systems

All I/O slots (MRI, ESI and I/O) support any combination of I/O output modules. The selection of already available IMS output modules provides a stunning selection of output signals, but will be expanded in the future to add more signals and physical interfaces as needed.

Product Description IMS Modules

Overview: IMS Modules

IMS CPU Modules

As the central management hub, the CPU module is another core element of our IMS systems. It runs the management and configuration interfaces and is also responsible for alarm notifications and status information. The LTOS firmware platform offers a feature rich newly designed WebUI as well as a powerful SNMP management interface for a perfect integration of the IMS device into your central network management system.

IMS Network Modules

LNE: Network Expansion - additional network interfaces
IMS HPS: PTP / SyncE / Hardware NTP Interface with Dual Core CPU

IMS Clock Modules

The GNSS satellite clock modules and the TCR Time Code Reader/Generator are the central synchronization elements in an IMS system. The internal clock carries a highly stable oscillator that is utilized to generate the base synchronization signals which are distributed to all I/O module slots via the backplane.

IMS Input Modules

MRI: 10MHz, PPS, IRIG, TC-AM / TC-DCLS reference signals
ESI: Input module for 2.048MHz, 2.048MBit/s and variable frequencies
HPS: PTP / SyncE / Hardware NTP Interface

IMS Output Modules

IMS Telecom Modules

Telecom Synchronization Signal Card (E1/T1 framed/unframed)

The ideal output card for telecom applications, offering 2048 kHz (ITU-T G.703) -- 75 Ohm unbalanced and 120 Ohm balanced frequency outputs as well as BITS 2048 kBit/s or 1544 kBit/s framed outputs with full SSM/BOC support, both as 75 Ohm unbalanced and 120 Ohm balanced. It is possible to order a LIU card with front panels with multiple combinations of these outputs.

IMS Measurement Modules

IMS modules to perform measurements of, among others, mains frequencies in 50/60Hz power supply networks, measurements of 1PPS signals or 10 MHz frequencies.

IMS Power Supplies

Meinberg's brand new IMS power supplies have been custom made with high efficiency in mind, the two models currently available support either 100-240 V AC/DC or 20-60 V DC and it is possible to populate the PWR slots with an arbitrary combination of both AC and DC power supplies, for example if both power sources are available in a rack.