IMS-BPE: Basic Port Expansion - IMS Module for Standard Output Signals
Key Features
- Large variety of output signals and programmable pulses: 10 MHz, TC-DCLS/-AM, 2.048 MHz, TTL, PPS, PPM, PPH ...
- Flexible configuration of output signals through the web interface of your IMS system (BPE8000 series)
- Pre-configured BPE modules with fixed outputs available (BPE2000 series)
Product Description
BPE8000 Series
The BPE8000 series with eight different BNC and ST connection combinations provides flexible configurations of output signals through the web interface of your IMS system. As requirements of application environments change, flexible and customizable combinations of output signals can easily be set up. An electronically controlled switch (multiplexer) on the module board allows the selection of signals distributed by the receiver module via the backplane.
BPE Module | Connectors | Signal Outputs |
---|---|---|
BPE8000 | 4x BNC female | TTL |
BPE8100 | 4x ST | Fiber Optic - Multimode |
BPE8200 | 2x ST, 2x BNC female | 2x Fiber Optic - Multimode, 2x TTL | BPE8250 | 2x ST, 2x BNC female | 2x Fiber Optic - Multimode, 1x TTL, 1x Modulated Time Code (TC-AM) |
BPE8300 | 4x ST | Fiber Optic - Singlemode |
BPE8400: | 2x ST, 2x BNC female | 2x Fiber Optic - Singlemode, 2x TTL |
BPE8500 | 4x ST | 2x Fiber Optic - Multimode, 2x Fiber Optic - Singlemode |
BPE8600 | 4x BNC female | 2048 kHz (ITU G.703-15 - 75 Ohm unbalanced) * |
BPE8700 | 4x BNC female | 3x TTL, 1x Modulated Time Code - TC-AM ** |
* | Fixed outputs, no signal selection possible | |
** | BNC sockets Out 1 - Out 3 are freely programmable, Out 4 is permanently set to TC AM |
BPE2000 Series
From the previous 2000 series of our preconfigured BPE modules with fixed outputs, the following variants are still available:
BPE Module | Connectors | Signal Outputs |
---|---|---|
BPE2016 | 4x BNC female | 4x Progr. Pulses PA |
BPE2025 | 4x BNC female | 4x 5 MHz Sine Wave |
BPE2352 | 2x BNC female, 1x 3 pin DFK | 1x TCA DCLS, 1x TC AM, 1x Relay Out |
BPE2500 | 4x 2 pin DFK, 1x BNC female | 4x Progr. Pulses PhotoMOS, 1x TC AM |
Specification of signal levels:
- PA: 10 Vpp into 50 Ohm
- 5 MHz / 10 MHz: 1 Vpp (5 dBm) into 50 Ohm
- 2048 kHz: 1 Vpp into 120 Ohm
- TC AM: 3 Vpp (mark) / 1 Vpp (space) into 50 Ohm
- TCA DCLS: 5 V / 250 mA
- TTL: 2.5 V into 50 Ohm
- Optocoupler: UCE max = 55 V, IC max = 50 mA, Ptot = 150 mW
- PhotoMOS: 250 V AC/DC, 150 mA
- Relay Out: AC 1 A (250 V); DC 0.1 A (250 V) / 1 A (30 V)
- Fiber Optic - Multimode: 850 nm, 15 µW min.
- Fiber Optic - Singlemode: 1310 nm, 30 µW min.
Characteristics
Status Info |
LED Status Indicators
|
Operating Voltage | +5 V DC |
Current Draw | 5 V +-5%, 150 mA |
Supported Temperature | Operational: 0 - 50 °C (32 - 122 °F)
Storage: -20 - 70 °C (-4 - 158 °F) |
Supported Humidity | Max. 85 % (non-condensing) at 40 °C |
Warranty | Three-year warranty |
RoHS Status of Product | This product is fully RoHS-compliant. |
WEEE Status of Product | This product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself. |
Downloads
Short Info Sheet
Manuals
- Handbuch (deutsch) bpe-2000.pdf als PDF: 3151KB - Stand: 19.Nov.2019
- Handbuch (deutsch) bpe-2010.pdf als PDF: 2437KB - Stand: 27.Sep.2022
- Handbuch (deutsch) bpe-8000.pdf als PDF: 2731KB - Stand: 19.Nov.2019
- Handbuch (deutsch) bpe-3050.pdf als PDF: 2683KB - Stand: 19.Oct.2023
- Manual (english) bpe-2000.pdf as PDF: 3158KB - Rev.: 2019-Nov-19
- Manual (english) bpe-2010.pdf as PDF: 2434KB - Rev.: 2022-Sep-27
- Manual (english) bpe-8000.pdf as PDF: 2727KB - Rev.: 2019-Nov-19
- Manual (english) bpe-3050.pdf as PDF: 2673KB - Rev.: 2023-Oct-19
Please note that only the most recent manual version is available for download. This manual therefore may not be suitable for all product versions.
- For drivers, SDKs, tools and utilities, please check our Download Section