NUC80E: Slave Clock Driver
Key Features
- Up to 80 Slave Clocks and cascadable
- Second Slave Line and Minute Slave Line, Short Circuit Proof Pulse Outputs
- Alphanumeric Display
- Autotracking of the Slave Clocks
- Buffered RAM
- +5V Supply for a Radio Clock
Product Description
Characteristics
Display | 8-digit alphanumeric dot matrix display, digit size 5 mm |
Control Elements | Two keys for menu driven settings |
Pulse Outputs | shorted slave line detection and autotracking of the slave clocks potential separation between power and control parts pulse voltage: 24V pulse current: 0.6A max. pulse width: 1sec (minute slave line), 0.5sec (second slave line) pulse outputs short circuit proof |
Interface | 20mA current loop input (passive) |
Serial Time String Output | Baudrate: 9600 baud Framing: 7E2 |
Alarm output | Active when slave line is shortened or in case of driving failure |
Dimensions of the front panel | 12HP/3U (60mm x 128mm) |
Electrical Connectors | Male connector, mixed F/H, DIN 41612 Type F: 24pin, type H: 7 pin |
Operating Voltage | Input: 230V/50Hz Output: +5V/350mA (power supply for the radio clock) |
Board type | Eurocard |
Board Dimensions | 160 mm x 100 mm, 1,5 mm Epoxy |
Supported Temperature | Operational: 0 - 50 °C (32 - 122 °F)
Storage: -20 - 70 °C (-4 - 158 °F) |
Supported Humidity | Max. 85 % (non-condensing) at 40 °C |
Warranty | Three-year warranty |
Downloads
Short Info Sheet
Manuals
Please note that only the most recent manual version is available for download. This manual therefore may not be suitable for all product versions.
- For drivers, SDKs, tools and utilities, please check our Download Section