TSU-GbE: PTP / SyncE / Hardware NTP Interface
Key Features
- Compatible with the Meinberg IMS Platform
- High Power Dual Core CPU
- LED status indicators for init, error and PTP mode
- Data Link Layer: Layer 2 / Layer 3 / E2E / P2P
- 1-Step or 2-Step Master/Slave operation
- SyncE - Synchronous Ethernet
- 10 ns Time Stamp Accuracy
- Multi-Profile Support
(Default, Power, Telecom, SMPTE) - Gigabit Ethernet SFP/RJ45 Combo Port
- 2 BNC Outputs for 1 PPS,10 MHz or 2048 kHz
Product Description
The ability to select Master and Slave operation for either Default, Power, Telecom or SMPTE profile makes this product the most flexible PTP solution on the market, suitable for a wide range of applications.
A lot of IEEE 1588 slave devices or NTP clients from different market segments can be synchronized, even over IPv6 networks, for example eNodeB's for LTE base stations, Linux servers with hardware-assisted time stamping support for high-frequency trading applications, IEEE 1588 compatible IEDs in Smart Grid environments or IP-interconnected Audio / Video devices in broadcast studios.
The Synchronous Ethernet function provides a high accurate frequency transport over Ethernet networks. The card can be used either to take a SyncE signal from the network as a source or generate SyncE as a Master.
Characteristics
Supported PTP Profiles |
Default:
- IEEE 1588v2 (PTPv2) Power: - IEC 61850-9-3 - IEEE C37.238-2011 - IEEE C37.238-2017 Telecom: - ITU-T G.8265.1 Frequency - ITU-T G.8275.1 Phase/Time - ITU-T G.8275.2 Phase/Time Broadcast: - SMPTE ST 2059-2 - AES67 Media Profile AVB/TSN: - IEEE 802.1AS |
NTP Mode | NTP Server Mode (10 ns timestamp accuracy) |
1588 Clock Mode | 1-Step or 2-Step Master/Slave operation |
PTP Modes | Multicast Layer 2 (IEEE 802.3)
Multicast/Unicast Layer 3 (UDP IPv4/IPv6) E2E / P2P Delay Mechanisms Up to 128 messages/second per client |
Synchronous Ethernet | Master and Slave Capability
Compliant to ITU-T G.8261, G.8262 and G.8264 Ethernet Synchronization Messaging Channel (ESMC) |
Processor Type | CPU: 1 GHz Dual Core ARM |
Network Protocols | IPv4, IPv6
DHCP, DHCPv6 DSCP IEEE 802.1q VLAN filtering/tagging |
Output signal | 2x BNC (50 Ohm) connectors
Configurable signals (taken from chassis backplane): 1 PPS, 10 MHz, 2048 kHz |
Available Network Connectors |
Combo Port: *
1 x 100/1000BASE-T RJ45 1 x GBIT SFP - Slot * The two network connectors are dedicated to a single physical interface. |
Supported Models | LANTIME M900
IMS - LANTIME M400, M1000, M3000 |
Supported Temperature | Operational: 0 - 50 °C (32 - 122 °F)
Storage: -20 - 70 °C (-4 - 158 °F) |
Supported Humidity | Max. 85 % (non-condensing) at 40 °C |
Warranty | Three-year warranty |
RoHS Status of Product | This product is fully RoHS-compliant. |
WEEE Status of Product | This product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself. |
Downloads
Short Info Sheet
Manuals
- Handbuch (deutsch) zur Zeit nicht verfügbar.
- Manual (english) not available at current time.
- For drivers, SDKs, tools and utilities, please check our Download Section