GPSAV4: GPS Antenna Distributor (4-port, external)
Key Features
- Up to 4 GPS Receiver with one Antenna
- No additional Power Supply necessary
- GPSAV4 antennas with three cascading levels
Product Description
The GPSAV4 is supplied with power via the GPS receiver connected to output connector 1. This output must therefore always be enabled; the others can be left disabled as necessary.
The signal distributor is in a plastic housing fitted with five standard Type N input and output connectors.
Multiple GPSAV4s can be connected in a cascaded structure (up to a maximum of three levels).
You can find continuative information here:
Application of the GPS Antenna Splitter
GPSAV4 Data Sheet
Characteristics
Signal Delay | Additional Path Delay: 50ns |
Gain | 0 ... +3 dB |
Operating Voltage | 12 V ... 18 V DC (from GPS receiver at output no.1) |
Current Draw | ca. 20 mA |
Mixing Frequency | Mixture frequency: 10 MHz
Intermediate frequency: 35.4 MHz |
Physical Dimensions | 182 mm x 65 mm x 37 mm (width x depth x height) |
Supported Temperature | Operational: 0 - 50 °C (32 - 122 °F)
Storage: -20 - 70 °C (-4 - 158 °F) |
Supported Humidity | Max. 85 % (non-condensing) at 40 °C |
Warranty | Three-year warranty |
RoHS Status of Product | This product is fully RoHS-compliant. |
WEEE Status of Product | This product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself. |
Downloads
Short Info Sheet
Manuals
Please note that only the most recent manual version is available for download. This manual therefore may not be suitable for all product versions.
- For drivers, SDKs, tools and utilities, please check our Download Section