ONT4xx/ONT6xx: NTP LED Large Display
Key Features
- 4 or 6 Digit red LED Display
- large 100 mm numerals, visible over 50 mtrs.
- 12 h / 24 h time option
- Power over Ethernet, no Power Supply needed
- High Quality Stainless Steel or Aluminium Housing
- DHCP or static IP addressing
- Telnet configuration
Product Description
Plug directly into an Ethernet jack on your local area network. No AC plug is required, so installation is inexpensive and its easy to move clocks around. Time updates are received automatically over the network, and no specialized software is required - control one or hundreds of clocks with a simple telnet session. These devices make practical use of PoE standards to eliminate electrical wiring requirements and simplifying installation.
If the network is not currently PoE-enabled and is going to support a PoE digital clock, a Single Port Midspan Power Injector must be added to the 10/100 BaseT LAN. This injector is not included in the scope of supply and must be ordered separately if required.
- Time zone settings and daylight saving configuration occur via telnet session.
- These displays work excellent with all Meinberg Lantime Time Servers.
Characteristics
Display | ONT4xx: red 4-digit 7-segment LED display (hh:mm), 100 mm (4") numerals ONT6xx: red 6-digit 7-segment LED display (hh:mm:ss), 100/75 mm (4"/3") numerals |
Electrical Connectors | 10/100 BaseT Ethernet connection (IEEE802.3af, PoE) via RJ45 connector |
Operating Voltage | Power over Ethernet (PoE)
compliant to IEEE 802.3af, less than 15,4 Watt |
Form Factor | ONT4SS, ONT6SS: brushed Stainless Steel cabinet ONT4BK, ONT6BK: Powder coat black Aluminium cabinet |
Physical Dimensions | ONT4xx: 305 mm x 153 mm x 56 mm (width x height x depth) ONT6xx: 445 mm x 153 mm x 56 mm (width x height x depth) |
Supported Temperature | 32 º to 104 ºF (0 º to 40 ºC) |
Supported Humidity | max 95 %, non-condensing |
Warranty | Two-Year Warranty |
Options |
Note:
For a non PoE-capable network connection you need a PoE injector - this is not included in the scope of delivery and must be ordered additionally from us. Mounting kit for single and double Cantilever or Pendant mounting. (No accessory is needed when mounting the clock with the back flush to a wall) |
RoHS Status of Product | This product is fully RoHS-compliant. |
WEEE Status of Product | This product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself. |
Downloads
Short Info Sheet
Manuals
- Handbuch (deutsch) zur Zeit nicht verfügbar.
Please note that only the most recent manual version is available for download. This manual therefore may not be suitable for all product versions.
- For drivers, SDKs, tools and utilities, please check our Download Section