microSync Broadcast: Compact and flexible Sync Solution for Broadcast Environments
Key Features
-
Selectable Reference Time Sources:
-
GPS: Satellite receiver for the Global Positioning System
- Recommended for fixed-site applications -
GNS: Combined GPS/GLONASS/Galileo/BeiDou satellite receiver
- Recommended for both fixed-site and mobile applications -
GNS-UC: GPS and Galileo Satellite Receiver with Up-Converter for Meinberg GPS Antenna / Converter
- Recommended for both fixed-site and mobile applications
-
GPS: Satellite receiver for the Global Positioning System
- High Performance NTP Server (NTP & SNTP v2, v3, v4)
- Meinberg Device Manager for configuration and status monitoring
- Powerful IEEE 1588 PTP Time Server incl. SMPTE ST 2059-2, AES67 Media and IEEE 802.1AS Profiles
- Half-Rack Option for a Space Efficient Design
- Different oscillator options for advanced holdover performance
- Option: OLED display with rotary knob for initial setup (RX models only)
- Video-Sync Generator and Video Input References (Black Burst, LTC and Word Clock)
Product Description
This innovative, multipurpose synchronization solution offers a variety of outstanding features, many of which are also found in Meinberg's IMS and LANTIME product families.
Key features include a GNSS receiver, two PTP ports, two Management/NTP ports, Black Burst, LTC, Word Clock, DARS and many other sync pulses available as input or output. The microSync Broadcast variants combine a modern sync reference for IP based devices and a Signal Pulse Generator for legacy video and audio devices.
The half-rack microSyncHR (7xx) model impresses with its compact design and high port density and is a perfect solution for smaller broadcast environments like OB vans or remote production use cases. The 19-inch rackmount microSyncRX (7xx/8xx) model additionally offers redundant power supplies and OLED display as an option.
The units run the operating system meinbergOS and can be managed using the Meinberg Device Manager software, which is available for Windows and Linux platforms.
For further information, please check out our datasheets:
Datasheet microSyncRX Broadcast (PDF)
Datasheet microSyncHR Broadcast (PDF)
Characteristics
Supported PTP Profiles |
Default:
- IEEE 1588v2 (PTPv2) Power: - IEC/IEEE 61850-9-3 - IEEE C37.238-2011 - IEEE C37.238-2017 Telecom: - ITU-T G.8265.1 Frequency - ITU-T G.8275.1 Phase/Time - ITU-T G.8275.2 Phase/Time - DOCSIS 3.1 Broadcast: - SMPTE ST 2059-2 - AES67 Media Profile AVB/TSN: - IEEE 802.1AS |
Synchronous Ethernet | Master and Slave Capability
Compliant to ITU-T G.8261, G.8262 and G.8264 Ethernet Synchronization Messaging Channel (ESMC) |
Display |
OLED display option
Functions (system administration):
|
Network Protocols | IPv4, IPv6
NTPv3, NTPv4 PTPv2 IEC 62439-3 (PRP) DHCP, DHCPv6 DSCP IEEE 802.1q VLAN filtering/tagging IEEE 802.1p QOS SNMPv1/v2/v3 Remote Syslog Support (UDP) |
Interface | Single serial RS-232 interface |
Network Interface |
Gigabit Ethernet (GbE) - SFP:
LAN 0, LAN 1 Management 10/100/1000Mbit RJ45 or 1000FX NTP LAN 2, LAN 3 Management 10/100/1000Mbit RJ45 or 1000FX NTP / PTP |
Universal Serial Bus (USB) Ports |
USB Terminal
USB-to-serial console - Micro-USB Type B USB Host USB connector management CPU - USB Type A |
BNC Connectors |
Output SignalsBlack Burst OutputOutput signal: PAL, NTSC Black Burst with VITC support Signal level: 300 mVpp into 75 Ohm (unbalanced)
DARS Output
Word Clock Output
Input Signals
Black Burst Input
Word Clock Input
Pulse Per Second Input
|
GPIO (General Purpose Input/Output) |
GPIO / LTC
Input signal: LTC Reader (25 fps) Output signals: LTC Out, DARS Out, Time Sync Out Signal level: TTL, 2,5 Vpp (MARK/SPACE) into 50 Ohm |
Oscillator Options | OCXO HQ
Holdover performance 1 day: ± 22 E-6 sec 1 year: ± 788 E-3 sec OCXO DHQ Holdover performance 1 day: ± 4.5 E-6 sec 1 year: ± 158 E-3 sec |
Power Consumption |
microsyncHR
Pmax = 30 W microsyncRX Pmax = 100 W (redundant operation) |
Operating Voltage |
Maximum voltage range:
microSyncRX
microSyncHR
|
Form Factor | Housing Type: 19", 1HE 482,6 mm x 248 mm x 43 mm /19 inch x 9.76 inch x 1.69 inch (widthx depth x height) Material: Steel |
Atmospheric Pressure | 615 to 1600 hPa |
Operating Altitude | Up to 4000 m (13,123 ft) above sea level |
Protection | IP30 |
Supported Temperature | 0 °C to 50 °C (32 °F to 122 °F) (operation) |
Storage Temperature | -20 to 70 °C (-4 to 158 °F) |
Supported Humidity | 5 % to 95 %, 40 °C, non-condensing |
Compliances |
|
Contents of Shipment | Included in delivery is an outdoor antenna incl. mounting kit and pre-assembled antenna cable. The microSyncHR system is supplied with a power adapter (input voltage range 90 - 264 V AC, output voltage 24 V DC). |
Warranty | Three-year warranty |
RoHS Status of Product | This product is fully RoHS-compliant. |
WEEE Status of Product | This product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself. |
Downloads
Short Info Sheet
Manuals
- Handbuch (deutsch) microsync.pdf als PDF: 17614KB - Stand: 06.Jul.2023
- Handbuch (deutsch) meinberg-os_webinterface.pdf als PDF: 8353KB - Stand: 21.Sep.2022
- Handbuch (deutsch) meinberg-device-manager.pdf als PDF: 14200KB - Stand: 16.Jun.2020
- Handbuch (deutsch) microsync_hr701_dc.pdf als PDF: 4189KB - Stand: 01.Dec.2023
- Handbuch (deutsch) microsync_rx800_acdc.pdf als PDF: 2624KB - Stand: 01.Dec.2023
- Manual (english) microsync.pdf as PDF: 17421KB - Rev.: 2023-Jul-06
- Manual (english) meinberg-os_webinterface.pdf as PDF: 8335KB - Rev.: 2022-Sep-21
- Manual (english) meinberg-device-manager.pdf as PDF: 13725KB - Rev.: 2020-Jun-16
- Manual (english) microsync_hr701_dc.pdf as PDF: 4298KB - Rev.: 2023-Dec-01
- Manual (english) microsync_rx800_acdc.pdf as PDF: 2734KB - Rev.: 2023-Dec-01
- For drivers, SDKs, tools and utilities, please check our Download Section