ED170MP: The ready-to-operate GPS system built up in rackmount slimline modular case.
Key Features
- 2 time trigger inputs
- Pulses per second and per minute
- 2 RS-232 interfaces
- integrated power supply (85 ... 264VAC)
- Four frequency outputs
10MHz, 3.0Vpp into 50 Ohm - alarm relay output, changeover contact
- Including GPS antenna, 20m standard cable and manual on USB key
Product Description
The ready-to-operate system ED170MP is built up in 19" slimline modular case (1U).
The frequency locking of the master oscillator to the GPS system enables the module GPS170 to generate fixed and programmable standard frequencies with high accuracy and stability. Various oscillator options allow the cost efficient implementation of different requirements concerning the accurracy of the outputs. The pulse generator of ED170 generates pulses per second and per minute. The pulses are synchronized to UTC second.
Two serial interfaces are available for sending time strings. These ASCII telegrams include information regarding time, date and status of the GPS receiver. The module provides two inputs for measurement of asynchronous time events. These capture events can be read via a serial interface.
A powerful and feature-rich software called GPSMON is available for configuration and monitoring of your Meinberg GPS receivers.
Characteristics
Receiver Type | 6 channel GPS C/A-code receiver |
Status Indicators | Fail-LED shows that the internal timing has not been synchronized or that a system error occurred Lock-LED shows that the calculation of the position has been achieved after reset |
Type of Antenna | Included GPSANTv2 antenna with innovative downconverter technology that allows transmission routes of up to 300 m using RG58 cable, 700 m using RG213 cable, and 1100 m using H2010 Ultraflex cable |
Control Elements | Configuration occurs by using the enclosed monitoring software, connected to the system via the serial interface COM0. |
Synchronization Time | Max. 1 minute in normal operating conditions
Max. 25 minutes (average 12 minutes) upon first initialization or in the absence of saved satellite data |
Frequency Outputs | Four frequency outputs: 10MHz, 3.0Vpp into 50 Ohm, female BNC connectors |
Pulse Outputs | Four pulse outputs: 1PPS, 3.0Vpp into 50 Ohm, female BNC connectors |
Interface | Two independent serial RS-232-interfaces, menu configurable |
Serial Time String Output | Baud rate: 300, 600, 1200, 2400, 4800, 9600, 19200 Baud Data format: 7N2, 7E1, 7E2, 8E1, 8N1, 8N2 Time telegram: Meinberg Standard Time String , SAT, Uni Erlangen (NTP), SPA, Sysplex, RACAL, NMEA0183 (RMC,GGA,ZDA), Meinberg GPS, COMPUTIME, ION oder Capture String |
Time-Trigger inputs | Resolution: 100 nsec, triggered by falling TTL slope Time of trigger event readable via RS232-interface |
Antenna Connector | Type-N connector |
Backup Battery Type | When main power supply fails, hardware clock runs free on quartz basis, almanac data is stored in RAM Life time of lithium battery min. 10 years |
Supported Time String Formats | Meinberg Standard Timestring, Uni Erlangen Timestring, SYSPLEX Timer, NMEA, Computime, ABB-SPA, SAT, Arbiter |
Firmware | Flash-EPROM, bootstrap loader |
Form Factor | 19'' aluminium case (1U) Schroff Multipac |
Power Supply Unit | Standard PSU: 85 ... 264VAC, 47 ... 63Hz Several other power supply units (even for DC power supply) are available upon request. |
Physical Dimensions | 485mm x 45mm x 305mm |
Protection | IP20 |
Supported Temperature | Operational: 0 - 50 °C (32 - 122 °F)
Storage: -20 - 70 °C (-4 - 158 °F) |
Supported Humidity | Max. 85 % (non-condensing) at 40 °C |
Contents of Shipment | Included in delivery is our GPS antenna incl. converter unit and 20 m GPS antenna cable (RG58). |
Warranty | Three-year warranty |
Downloads
Short Info Sheet
Manuals
- Handbuch (deutsch) zur Zeit nicht verfügbar.
- Manual (english) not available at current time.
- For drivers, SDKs, tools and utilities, please check our Download Section