 |
Solutions for Time and Frequency Synchronization |
| Products | Support | Downloads | About Meinberg | Contact | Search |  |
| by Application | by Time Source | by Form Factor | Time Server | Product Archive | ||
 |
|
|
DCF77 Radio Clock - PCI/PCI-X Bus
 The PCI511 is a DCF77 radio clock for synchronization of computers with a PCI or PCI-X slot. It receives the longwave radio time signal from the DCF77 sender located near Frankfurt/Main, Germany.
Timecode Generator
 IRIG or AFNOR time code generator with various outputs MEINBERG: Quality Management System
|
Key Features
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type of receiver: | Narrowband DCF77 quadrature receiver with automatic gain control, bandwidth: approx. 20Hz |
| Display: | 8 digit 7-segment LED display (2.5mm) for time or date (switch-selectable) optional: 20HP (100mm) wide front panel with 10mm height 7-segment LED display |
| Status info: | Modulation and field strength visualized by LEDs Free running state visualized by LED after switching to free running quartz clock mode |
| Synchronization time: | 2-3 minutes after correct DCF77 signal reception |
| Accuracy free run: | Accuracy of the quartz base after min. 24hrs of synchronized operation: ±1·10-6 |
| Reception Control: | Multiple check of received time telegram Plausibility control by using two complete time telegrams |
| Pulse outputs: | Pulse per second (PPS) and pulse per minute (PPM). TTL level, pulse width: 200msec |
| Interface: | Two independent serial RS232/current loop interfaces, configurable |
| Data format of interfaces: | COM0: Baudrate: 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 baud Framing: 7E2 or 8N1 (others on request) 2 active and 2 passive 20mA current loop outputs 1 active/passive 20mA current loop input COM1: Baudrate: 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600 baud Framing: 7E2 or 8N1 (others on request) 1 active and 1 passive 20mA current loop output 1 active/passive 20mA current loop input Output string: 32 ASCII characters with date, time and status information |
| Dimensions of the front panel: | 4HP/3U (20mm x 128mm) |
| Electrical connectors: | 64-pin rear VG edge connector DIN 41612 SMB male connector |
| Power supply: | +5V DC |
| Backup battery type: | In case of supply voltage failure the on-board RTC keeps the time based on XTAL for more than 150 hours (buffer capacitor) Optional: lithium backup battery (life time: 10 years) |
| Current consumption: | approx. 250mA |
| Board type: | Eurocard |
| Board dimensions: | 160mm x 100mm , 1,5mm Epoxy |
| Ambient temperature: | 0 ... 50°C / 32 ... 122°F |
| Humidity: | Max. 85% |
| Scope of supply: | Scope of supply includes an active ferrite antenna AI01 and 5m of RG174 coaxial cable with BNC connectors. Optional: AW02 with RG58 and patch cord, other length of cable |
| RoHS-Status of the product: | This product is fully RoHS compliant |
| WEEE status of the product: | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |
Downloads
|
||
|
|
| [ Home | Products | Top ] |
|