 |
Solutions for Time and Frequency Synchronization |
| Products | Support | Downloads | About Meinberg | Contact | Search |  |
| by Application | by Time Source | by Form Factor | Time Server | Product Archive | ||
 |
|
|
IRIG GPS
 The IRIG output of the GPS170PCI can be used to synchronize IRIG time code receivers
Timecode Converter
 The TCR167PCI receives IRIG-A/B or AFNOR time codes and can be used for synchronizing the system time of its host PC.
IRIG PCI
 The TCR511PCI is synchronized by modulated (DC Level Shift) and unmodulated (AM) IRIG and AFNOR time code signals and can be integrated in industrial systems that require high precision.
IRIG Time Code
 Meinberg IRIG Generators and combined Receivers/Generators
IRIG Generator
 The board TCG511 has been designed for the generation of IRIG and AFNOR standard time codes
IRIG Time Server
 The M300/TCR comes with a built-in TCR module which decodes a IRIG/AFNOR signal from any compatible time code generator.
Timecode Reader
 The TCR51USB is a Timecode Reader in a compact plastic housing - decodes IRIG modulated and unmodulated
Clock GPS Time
 This GPS180PEX PCI EXPRESS slot card is the best choice for adding a highly accurate time base to your servers or workstations MEINBERG: Quality Management System
|
Key Features
|
|||||||||||||||||||||||||||||||||||||||||||||||||
| Status info: | 3 status LEDs for indication of: detection of a correct code, synchronization of the internal timing and holdover mode |
| Input signal: | Modulated IRIG A/B or AFNOR signal,
input insulated by transformer,
input impedance 600 ohm (optional 50 ohm) unmodulated (DC level shift) IRIG A/B signal, input insulated by photocoupler |
| Accuracy free run: | ±1·10E-6 if the decoder was synchronous for at least 1 h |
| IRIG Time Code Input: | IRIG-A133, A132, A003, A002, B123, B122, B003, B002 and AFNOR NFS 87-500 (other codes on request) |
| Pulse outputs: | Pulses per second (RS232/TTL level) and per minute (TTL level), pulse duration 200 msec |
| Precision of timebase: | ±5 µsec referred to IRIG-reference marker |
| Interface: | Single serial RS232 interface |
| Data format PC interface: | Binary, byte serial |
| Data format of interfaces: | Baudrate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400 baud Framing: 7E2, 8N1, 8E1, 8N2 Output string: 32 ASCII characters with date, time and status information |
| Statusbyte: | Information about holdover mode, synchronization since last reset and the validity of the RTC data. |
| Electrical connectors: | 9 pin sub D male connector BNC female connector |
| Computer interface: | 33MHz- or 66MHz-PCI BUS (PCI-X) 32 Bit/3.3V or 5V card slot |
| Backup battery type: | When main power supply fails, hardware clock runs free on quartz basis, life time of lithium battery min. 10 years |
| Board type: | PCI card short |
| Ambient temperature: | 0 ... 50°C / 32 ... 122°F |
| Humidity: | Max. 85% |
| RoHS-Status of the product: | This product is fully RoHS compliant |
| WEEE status of the product: | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |
Downloads
|
||
|
|
| [ Home | Products | Top ] |
|