Meinberg Radio Clocks the GPS, DCF and NTP Time Server Specialist
Solutions for Time and Frequency Synchronization
Products Support Downloads About Meinberg Contact Search Hier klicken für deutsche Seiten
by Application by Time Source by Form Factor Time Server Product Archive  
spacer

TCR510
IRIG Time Code Receiver


The TCR510 is synchronized by modulated (DC Level Shift) and unmodulated (AM) IRIG and AFNOR time code signals and can be integrated in industrial systems that require high-accurate time and/or frequency synchronization.
Image Zoom Image Zoom

The TCR510 is synchronized by modulated (DC Level Shift) and unmodulated (AM) IRIG and AFNOR time code signals and can be integrated in industrial systems that require high-accurate time and/or frequency synchronization.


 

End of Life Announcement

This product is not available anymore and may have been substituted by another product. Of course we continue to support existing units still in use. Please contact our support department for further details.

This product has been substituted by: TCR511


 
Related Pages
Timecode Generator

IRIG or AFNOR time code generator with various outputs
IRIG GPS

The IRIG output of the GPS170PCI can be used to synchronize IRIG time code receivers
IRIG Time Code

Meinberg IRIG Generators and combined Receivers/Generators
Timecode Converter

The TCR167PCI receives IRIG-A/B or AFNOR time codes and can be used for synchronizing the system time of its host PC.
IRIG PCI

The TCR511PCI is synchronized by modulated (DC Level Shift) and unmodulated (AM) IRIG and AFNOR time code signals and can be integrated in industrial systems that require high precision.
IRIG Time Server

The M300/TCR comes with a built-in TCR module which decodes a IRIG/AFNOR signal from any compatible time code generator.
Timecode Reader

The TCR51USB is a Timecode Reader in a compact plastic housing - decodes IRIG modulated and unmodulated

MEINBERG: Quality Management System

Certified by DQS Certified by IQNET

Key Features
IRIG Time Code Receiver

  • 3 Years Warranty RoHS compliant
  • 2 RS232 interfaces
  • Status LED
  • DCF77-simulation
  • Reception of time code formats IRIG-A/B or AFNOR NFS 87-500


Description
IRIG Time Code Receiver


The TCR510 has been designed for the reception of the IRIG code formats A133 and B123, as well as the translation of these received IRIG codes into a serial telegram and a pulse telegram as broadcasted by the German time code transmitter DCF77. TCR510 can perform a re-calculation of UTC from IRIG time. A buffered real time clock keeps time and date after power down. The receiver's automatic gain control (AGC) allows the reception of IRIG signals within an amplitude range from 600mV to 8V (peak to peak). The board is equipped with a flash memory and a bootstrap loader which allows to update the systems firmware via serial port.

Back to Top


Characteristics
IRIG Time Code Receiver


Input signal: modulated time code signal, input insulated by transformer, terminated in 50Ω / 600Ω / 5kΩ jumper selectable unmodulated (DC level shift) time code,
IRIG Time Code Input: IRIG-A133, A132, A003, A002, B123, B122, B003, B002 and AFNOR NFS 87-500 (other codes on request)
Frequency outputs: 10 MHz, 1 MHz, 100 kHz (TTL level) Accuracy referred to Reference : 1 x 10-8 ( TCXO ) if synchronized for more than 24hours
Pulse outputs: Pulse per second and pulse per minute (TTL level), pulse width: 200 msec
Precision of timebase: +/-10us referred to reference marker in synchronous mode
Interface: two independent RS232 ports COM0 and COM1 (COM1 RS485 optionally).
Data format of interfaces: Baudrates: 9600, 19200, Framing: 7E2 or 8N1
Modes: Telegram per second or on request.
Telegram: 32-Bytes ASCII with time and date information
Dimensions of the front panel: 4HP/3U (20mm x 128mm)
Electrical connectors: 64-pin rear VG edge connector DIN 41612
SMB male connector
Power supply: +5V DC
Power consumption: 1,2W / 3W ( TCXO / OCXO )
Backup battery type: When main power supply fails, hardware clock runs free on quartz basis, life time of lithium battery min. 10 years
Current consumption: 250mA/600mA ( TCXO / OCXO )
Board type: Eurocard
Board dimensions: 160mm x 100mm , 1,5mm Epoxy
Ambient temperature: 0 ... 50°C / 32 ... 122°F
Humidity: Max. 85%
RoHS-Status of the product: This product is fully RoHS compliant
WEEE status of the product: This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself.

Back to Top


Downloads
IRIG Time Code Receiver

 
PDF Documents Please note that only the most recent manual version is available for download. This manual therefore may not be suitable for all product versions.

Software Downloads

  • For drivers, SDKs, tools and utilities, please check our Download area
  




spacer
 [ Home  | Products  | Top  ]
spacer
Meinberg Funkuhren GmbH & Co. KG
Lange Wand 9
D - 31812 Bad Pyrmont		Contact
Phone: +49 (0) 52 81 / 93 09 - 0
Facsimile: +49 (0) 52 81 / 93 09 - 30		Legal Notice and Privacy Policy | Sitemap
Homepage: http://www.meinberg.de
E-Mail: info@meinberg.de
IRIG and AFNOR Timecode-Receiver TCR510