Meinberg Radio Clocks the GPS, DCF and NTP Time Server Specialist
Solutions for Time and Frequency Synchronization
Products Support Downloads About Meinberg Contact Search Hier klicken f?tsche Seiten
by Application by Time Source by Form Factor Time Server Product Archive  
spacer

SIM77P : DCF77 Simulator


DCF77 Simulator SIM77P
Image Zoom Image Zoom

DCF77 Simulator SIM77P
 


 
Related Pages
DCF77 Radio Clock - PCI/PCI-X Bus

The PCI511 is a DCF77 radio clock for synchronization of computers with a PCI or PCI-X slot. It receives the longwave radio time signal from the DCF77 sender located near Frankfurt/Main, Germany.
GPS Clock

The GPS170PCI has been designed to synchronize the system time of computers with PCI/PCI-X bus interface
Clock GPS Time

This GPS170PEXPCI slot card is the best choice for adding a highly accurate time base to your servers or workstations
IRIG B

IRIG Time Code Reader and Generators
Network Time Synchronization

The public domain software package NTP - Network Time Protocol
Timecode Converter

The TCR167PCI receives IRIG-A/B or AFNOR time codes and can be used for synchronizing the system time of its host PC.
Network Time Server

The M300 time server are designed to be deployed in IPv6 networks
Timecode Generator

IRIG or AFNOR time code generator with various outputs

MEINBERG: Quality Management System

Certified by DQS Certified by IQNET

Key Features

  • 3 Years Warranty RoHS compliant
  • Large Number of AM Receivers connectable
  • Generates Amplitude modulated DCF77 Signal
  • 4 DC-Insulated Antenna Outputs


Description


The simulator SIM77P uses TTL level time marks supplied by either the satellite receiver GPS167 or the DCF77 correlation receiver PZF509 (with special adaption) to modulate the amplitude of a 77.5 kHz carrier generated on-board. The resulting DC-insulated output signal distributed fourfold and available at the rear VG edge connector is compatible with the LF signal spread by DCF77, the output circuit is designed to feed the antenna input circuit of a standard Meinberg DCF77 AM radio clock or an antenna distributor AV4 or AV5 which can in turn be used to feed several radio clocks. It is not allowed to use the SIM77P as an LF transmitter, so it is not possible to supply the simulated signal to a radio clock via its antenna.

Back to Top


Characteristics


Input signal: DCF time marks, TTL level
Frequency outputs: Amplitude modulated sine wave carrier 77.5kHz, dc-insulated
Output level: approx. -60dBm
the output is distributed fourfold on board
Dimensions of the front panel: 4HP/3U (20mm x 128mm)
Electrical connectors: 64 pin rear VG edge connector DIN 41612
Power supply: +5V DC
Current consumption: ca. 70mA
Board type: Eurocard
Board dimensions: 160mm x 100mm , 1,5mm Epoxy
Ambient temperature: 0 ... 50°C / 32 ... 122°F
Humidity: Max. 85%
RoHS-Status of the product: This product is fully RoHS compliant
WEEE status of the product: This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself.

Back to Top


Downloads

  
PDF Documents Please note that only the most recent manual version is available for download. This manual therefore may not be suitable for all product versions.

Software Downloads

  • For drivers, SDKs, tools and utilities, please check our Download area
  




spacer
 [ Home  | Products  | Top  ]
spacer
Meinberg Funkuhren GmbH & Co. KG
Lange Wand 9
D - 31812 Bad Pyrmont		Contact
Phone: +49 (0) 52 81 / 93 09 - 0
Facsimile: +49 (0) 52 81 / 93 09 - 30		Legal Notice and Privacy Policy | Sitemap
Homepage: http://www.meinberg.de
E-Mail: info@meinberg.de
DCF-77 Simulator SIM77P