 |
Solutions for Time and Frequency Synchronization |
| Products | Support | Downloads | About Meinberg | Contact | Search |  |
| by Application | by Time Source | by Form Factor | Time Server | Product Archive | ||
 |
|
|
DCF77 Radio Clock - PCI/PCI-X Bus
 The PCI511 is a DCF77 radio clock for synchronization of computers with a PCI or PCI-X slot. It receives the longwave radio time signal from the DCF77 sender located near Frankfurt/Main, Germany.
GPS PCI Card
 The Meinberg GPS170PCI slot card is the professional solution to your standalone computer synchronization requirements
Network Time Server
 The M300 time server are designed to be deployed in IPv6 networks
Timecode Converter
 The TCR167PCI receives IRIG-A/B or AFNOR time codes and can be used for synchronizing the system time of its host PC.
IEEE 1588-2008 Time Server
 The M600/GPS PTP synchronizes all PTPv2/IEEE 1588-2008 compatible clients and systems either NTP- or SNTP-compatible
GPS Slot Card
 The GPS180PEX can be installed in any single lane PCIe slot and offers an impressive selection of time, pulse and frequency outputs MEINBERG: Quality Management System
|
Key Features
|
|||||||||||||||||||||||||||||||||||
| Type of receiver: | Narrowband straight receiver with automatic gain control, Bandwidth: approx. 40Hz |
| Type of antenna: | Build in ferrite antenna |
| Control elements: | In case of stationary installation it is advisable to position the receiver in an optimal way. The case should be aligned at a right angle to the direction of the transmitter (Frankfurt). In normal applications it should be mounted with distance to solid steel and to TVs or computer monitors. When mounting the receiver near to metal the received signal may be deaden (attenuation), but the field-distortion causes an easier alignment of the antenna because of the ''nearly-360°-character'' In this case a function test is necessary. |
| Pulse outputs: | Demodulated time marks for further processing TTL level (when 5V supplied): Vdd - 1V (high) typ. 0.1V (low) Pulse width: 60...130msec (DCF-binary ''0'') 160...230msec (DCF-binary ''1'') |
| Physical dimensions: | 60mm x 50mm x 20mm (length x width x height) |
| Electrical connectors: | 4-wire cable The cable can be configured in all lenghts |
| Power supply: | 1,2V...5,5V |
| Current consumption: | 1.2V...5.5V @ 10mA (both LEDs bright) @ 1mA in power down mode |
| Form Factor: | Unbreakable plastic case |
| Ambient temperature: | 0°C ... +50°C |
| Scope of supply: | Stick pad for mounting the case (e.g. on windows/furniture) option: case sealed with silicon (IP54) |
Downloads
|
||
|
|
| [ Home | Products | Top ] |
|
