Meinberg Radio Clocks the GPS, DCF and NTP Time Server Specialist
Solutions for Time and Frequency Synchronization
Products Support Downloads About Meinberg Contact Search Hier klicken für deutsche Seiten
by Application by Time Source by Form Factor Time Server Product Archive  
spacer

PC32
DCF77 Computer Radio Clock (ISA bus)


DCF77 Slot Card PC32
Image Zoom Image Zoom


DCF77 Slot Card PC32

DCF77 slot card PC32 with ISA bus interface, periodic interrupts and RS232 interface.

The drivers package for Windows contains a time adjustment service which runs in the background and adjusts the Windows system time continously and smoothly. A monitor program is also included which lets the user check the status of the device and the time adjustment service, and can be used to modify configurable parameters.

The driver package for Linux contains a kernel driver which allows the board to be used as a reference time source for the NTP daemon which is shipped with most Linux distributions. This also turns the computer into a NTP time server which can also provide accurate time to other NTP clients on the network. Some command line tools can be used to setup configurable parameters and monitor the status of the board.

Additional drivers packages are available for DOS, Novell NetWare, and OS/2. At the bottom of this page there's a link to the download area.

The device's serial port can be used to update the card's firmware. Additionally it can be connected to the serial port of a computer to use the card as reference time source under operating systems where a serial time string is supported, e.g. by NTP, but no kernel device driver is available.


 

End of Life Announcement

This product is not available anymore and may have been substituted by another product. Of course we continue to support existing units still in use. Please contact our support department for further details.

This product has been substituted by: PCI511



 

Key Features
DCF77 Computer Radio Clock (ISA bus)

  • 3 Years Warranty RoHS compliant
  • IBM PC/XT/AT Interface
  • Pulses per second and per minute
  • Periodic interrupts
  • RS232 interface
  • Receiver status LEDs
  • Buffered hardware clock
  • Settable Base Address
  • Driver software for all popular operating systems




Back to Top


Characteristics
DCF77 Computer Radio Clock (ISA bus)


Type of receiver: Narrowband synchronous receiver with automatic gain control, Bandwidth: approx. 40Hz
Type of antenna: DCF77 indoor antenna AI01
Status info: RF Signal: Indicated by LED Antenna alignment enhanced by utility program
Free Running: Indicated by LED and utility program Without RF signal the clock runs on XTAL with an accuracy of ±1·10-6 (after 24 hours of synchronous operation)
Modulation: Indicated by LED and utility program
Accuracy free run: Accuracy of the quartz base after min. 24hrs of synchronized operation: ±1·10-6
Reception Control: Multiple check of received time telegram
Plausibility control by using two complete time telegrams
Interface: Single serial RS232 interface
Data format PC interface: Binary, byte serial
Data format of interfaces: Baudrate: 300, 600, 1200, 2400, 4800, 9600 Baud
Framing: 7E2, 8N1, 8E1, 8N2
Output string: 32 ASCII characters with date, time and status information
Statusbyte: Informations about free running mode, daylight savings time and DST pre-switch anouncement, synchronization since last reset, GMT/UTC time and validity of the hardware clock data
Electrical connectors: 9 pin sub D male connector
BNC female connector
Computer interface: IBM PC/XT/AT-Bus
Power supply: +5V DC
Backup battery type: In case of supply voltage failure the on-board RTC keeps the time based on XTAL for more than 150 hours (buffer capacitor)
Optional: lithium backup battery (life time: 10 years)
Current consumption: ca. 80mA
Board type: 8 bit short expansion board
Ambient temperature: 0 ... 50°C / 32 ... 122°F
Humidity: Max. 85%
Options: Pulse per second and pulse per minute (TTL level)

Back to Top


Downloads
DCF77 Computer Radio Clock (ISA bus)

 
PDF Documents Please note that only the most recent manual version is available for download. This manual therefore may not be suitable for all product versions.

Software Downloads

  • For drivers, SDKs, tools and utilities, please check our Download area
 




spacer
 Home  | Products  | Top  ]
spacer
Meinberg Funkuhren GmbH & Co. KG
Lange Wand 9
D - 31812 Bad Pyrmont
Contact
Phone: +49 (0) 52 81 / 93 09 - 0
Facsimile: +49 (0) 52 81 / 93 09 - 30
Legal Notice and Privacy Policy | Sitemap
Homepage: http://www.meinberg.de
E-Mail: info@meinberg.de
Computer Radio Clock PC32 (ISA Bus)