ONT4xx/ONT6xx : NTP LED Large Display
|
|
Related Pages
MEINBERG: Quality Management
System 
|
Key Features
- 4 or 6 Digit red LED
Display
- large 100mm numerals, visible over 50
mtrs.
- 12h/24h Time option
- Power over Ethernet, no Power Supply
needed
- High Quality Stainless Steel or
Aluminium Housing
- DHCP or static IP
addressing
- Telnet configuration
Description
Plug directly into an Ethernet jack on your local
area network. No AC plug is required, so installation
is inexpensive and it’s easy to move clocks
around. Time updates are received automatically over
the network, and no specialized software is required
- control one or hundreds of clocks with a simple
telnet session. These devices make practical use of
PoE standards to eliminate electrical wiring
requirements and simplifying installation.
If the network is not currently PoE-enabled and is
going to support a PoE digital clock, a Single Port
Midspan Power Injector must be added to the 10/100
BaseT LAN.
Time zone settings and daylight saving configuration
occur via telnet session.
These displays work excellent with all Meinberg
Lantime Time Servers.
Characteristics
|
Display: |
ONT4xx: red 4-digit
7-segment LED display (hh:mm), 100mm (4")
numerals
ONT6xx: red 6-digit 7-segment LED display
(hh:mm:ss), 100/75mm (4"/3") numerals |
| Physical
dimensions: |
ONT4xx: 305mm x 153mm x
56mm (width x height x depth)
ONT6xx: 445mm x 153mm x 56mm (width x height x
depth) |
| Electrical
connectors: |
10/100 BaseT Ethernet
connection (IEEE802.3af, PoE) via RJ45
connector |
| Form
Factor: |
ONT4SS, ONT6SS: brushed
Stainless Steel cabinet
ONT4BK, ONT6BK: Powder coat black Aluminium
cabinet |
| Ambient
temperature: |
0 ... 40°C |
|
Humidity: |
Max. 85% |
|
Options: |
Mounting kit for single and
double Cantilever or Pendant mounting.
(No accessory is needed when mounting the clock
with the back flush to a wall) |
| RoHS-Status of the
product: |
This product is fully RoHS
compliant |
| WEEE status of the
product: |
This product is handled as
a B2B category product. In order to secure a WEEE
compliant waste disposal it has to be returned to
the manufacturer. Any transportation expenses for
returning this product (at its end of life) have
to be incurred by the end user, whereas Meinberg
will bear the costs for the waste disposal
itself. |
|
Downloads
|
|
|
Please note that only the most recent manual
version is available for download. This manual
therefore may not be suitable for all product
versions.
- For drivers, SDKs, tools and utilities, please
check our Download
area
|
|
|
|
