 |
Solutions for Time and Frequency Synchronization |
| Products | Support | Downloads | About Meinberg | Contact | Search |  |
| by Application | by Time Source | by Form Factor | Time Server | Product Archive | ||
 |
|
|
DCF77 Radio Clock - PCI/PCI-X Bus
 The PCI511 is a DCF77 radio clock for synchronization of computers with a PCI or PCI-X slot. It receives the longwave radio time signal from the DCF77 sender located near Frankfurt/Main, Germany.
NTP Clock
 GPS170PCI slot card as time source for your network
GPS Time Server
 The M300 uses a built-in GPS radio clock as its reference time source
Network Time Synchronization
 The public domain software package NTP - Network Time Protocol
IEEE 1588-2008 Time Server
 The M600/GPS PTP synchronizes all PTPv2/IEEE 1588-2008 compatible clients and systems either NTP- or SNTP-compatible MEINBERG: Quality Management System
|
Key Features
|
|||||||||||||||||||||||||||||||
| Control elements: | Key for setting the slave line |
| Pulse outputs: | pulse voltage: 12V/24V selectable pulse current: 0.6A max. (24V), 1.2A max. (12V) pulse width: 1sec (minute slave line), 0.5sec (second slave line) pulse outputs short circuit proof |
| Dimensions of the front panel: | 10HP/3U (50mm x 128mm) |
| Electrical connectors: | Male connector, mixed F/H, DIN 41612 Type F: 24pin, type H: 7 pin |
| Power supply: | Input: 230V/50Hz Output: +5V/350mA (power supply for the radio clock) |
| Board type: | Eurocard |
| Board dimensions: | 160mm x 100mm , 1,5mm Epoxy |
| Ambient temperature: | 0 ... 50°C / 32 ... 122°F |
| Humidity: | Max. 85% |
Downloads
|
||
|
|
| [ Home | Products | Top ] |
|