 |
Solutions for Time and Frequency Synchronization |
| Products | Support | Downloads | About Meinberg | Contact | Search |  |
| by Application | by Time Source | by Form Factor | Time Server | Product Archive | ||
 |
|
|
PC Clock
 The IRIG output of the GPS170PCI can be used to synchronize IRIG time code receivers
Clock GPS Time
 This GPS180PEX PCI EXPRESS slot card is the best choice for adding a highly accurate time base to your servers or workstations
GPS Time Server
 The M300 uses a built-in GPS radio clock as its reference time source
NTP Time Server
 M600/GPS: High End NTP Time Server with integrated GPS radio clock. It synchronizes all systems either NTP- or SNTP-compatible and uses a built-in GPS radio clock as its reference time source
Time Synchronization
 Meinberg NTP Products - Time Server, PCI Cards, external Reference Clocks, Displays
Rackmount Time Server
 LANTIME M600/GPS PTP: PTP v2/IEEE 1588-2008 Grandmaster Clock and NTP Time Server with integrated GPS radio clock.
Time Server
 Meinberg NTP Products - Time Server, PCI Cards, external Reference Clocks, Displays
Timecode Reader
 The TCR51USB is a Timecode Reader in a compact plastic housing - decodes IRIG modulated and unmodulated MEINBERG: Quality Management System
|
Key Features
|
|||||||||||||||||||||||||||||||||||||||||||||||||
| Type of receiver: | 12 channel GPS C/A-code receiver |
| Type of antenna: | Remote powered GPS antenna/converter unit, up to 300m distance to antenna with RG58 and up to 700m distance with RG213 cable |
| Status info: | Fail-LED shows that the internal timing has not been synchronized or that a system error occurred Lock-LED shows that the calculation of the position has been achieved after reset |
| Synchronization time: | Max. 1 minute in normal operation mode, approx. 12 minutes after a cold start (discharged buffer battery) |
| Interface: | One serial RS232 interface |
| Data format of interfaces: | Baudrate: 300 to 19200 baud Framing: 7N2, 7E1, 7E2, 8E1, 8N1, 8N2 Time string: Meinberg Standard, Meinberg GPS, SAT, Uni Erlangen (NTP), SPA, NMEA0183 (RMC), Computime |
| Physical dimensions: | 105 mm x 85 mm x 104 mm (h x w x d) for 35mm DIN mounting rail |
| Electrical connectors: | Female Sub-Min-D connector for serial interface power cord receptacle for AC-line |
| Antenna connector: | BNC-connector |
| Power supply: | GPS180DHS: 19 ... 72VDC GPS180AHS: 100 ... 240VAC, 47 ... 63Hz GPS180DAHS: 100 ... 240VDC, 100 ... 240VAC |
| Power consumption: | ca. 4W |
| Backup battery type: | When main power supply fails, hardware clock runs free on quartz basis, almanac data is stored in RAM Life time of lithium battery min. 10 years |
| Firmware: | Flash-EPROM, bootstrap loader |
| Ambient temperature: | 0 ... 50°C / 32 ... 122°F |
| Humidity: | Max. 85% |
| Options: | - second independant interface as RS232, RS485 oder fiber optic - PPS with TTL level into 50 Ohm - PPS as fiber optic output - 10 MHz with TTL level into 50 Ohm - 10 MHz - 0.5 Vrms into 50 Ohm - oscillator: TCXO up to OCXO HQ, specifications look at oscillator options |
| RoHS-Status of the product: | This product is fully RoHS compliant |
| WEEE status of the product: | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |
Downloads
|
More Images |
|
|
GPS180AHS with PPS and 10MHz outputs via BNC female connector
|
| [ Home | Products | Top ] |
|
