GPS170MP : The ready-to-operate GPS systems built
up in rackmount slimline modular cases.
 Image
Zoom |
 |
|
The ready-to-operate systems GPS170-MQ/F4/MP
(GPS170-MQ/LCD/F4/MP) and GPS170/ MP
(GPS170/LCD/MP)
The satellite receiver clock GPS170
provides extremly precise time as well as
pulses and frequency outputs. The clock has
been developed for applications where
conventional radio controlled clocks cannot
meet the increasing requirements in precision
and reliability. High precision available
24/7 around the world is the main feature of
this high-quality system which receives its
information from the satellites of the Global
Positioning System.
|
|
|
Related Pages
MEINBERG: Quality Management
System 
|
Key Features
- 2 time trigger inputs
- Pulses per second and per
minute
- LC Display for configuration (
.../LCD/... types only)
- 2 RS232 interfaces
- integrated power supply (85 ...
264VAC)
- Optional (only .../F4/... models):
four frequency outputs
2.048MHz direct, 3.0Vpp into 50 Ohm
2.048MHz switched, 3.0Vpp into 25 Ohm
10MHz direct, 3.0Vpp into 50 Ohm
10MHz switched, 3.0Vpp into 25 Ohm
- alarm relay output, changeover
contact
- Including GPS antenna, 20m
standard cable and manual on USB key
Description
The ready-to-operate systems GPS170-MQ/F4/MP
(GPS170-MQ/LCD/F4/MP) and GPS170/ MP (GPS170/LCD/MP)
are built up in 19" slimline modular cases (1U).
The frequency locking of the master oscillator to
the GPS system enables the module GPS170 to generate
fixed and programmable standard frequencies with high
accuracy and stability. Various oscillator options
allow the cost efficient implementation of different
requirements concerning the accurracy of the outputs.
The pulse generator of GPS170 generates pulses per
second and per minute. As an option three
programmable outputs are available. The pulses are
synchronized to UTC second.
Up to four serial interfaces are available for
sending time strings. These ASCII telegrams include
information regarding time, date and status of the
GPS receiver. The module provides two inputs for
measurement of asynchronous time events. These
capture events are shown on the LC display (only LCD
models) and can be read via a serial interface.
The front panel of LCD models integrates a LC
display that shows information regarding the GPS
receiver in different menus. In combination with four
push buttons it is also used to setup all
configurable parameters.
The ../F4/.. models come with E1/T1 frequency
outputs and are widely used in the telecommunicaton
sector.
A powerful and feature-rich software called GPSMON
is available for configuration and monitoring of your
Meinberg GPS receivers.
Characteristics
| Type of
receiver: |
6 channel GPS C/A-code
receiver |
| Type of
antenna: |
Remote powered GPS antenna/converter unit, up
to 300m distance to antenna with RG58 and up to
700m distance with RG213 cable |
|
Display: |
LC-display, 2 x 40
characters, with backlight |
| Control
elements: |
Configuration occurs by
using the enclosed monitoring software, connected
to the system via the serial interface COM0 in
the front panel. ../LCD/.. only Configuration
occurs via the 2x40 character front panel LC
display or by using a monitoring software,
connected to the system via the serial interface
COM0 in the rear panel. |
| Status
info: |
Fail-LED shows that the
internal timing has not been synchronized or that
a system error occurred
Lock-LED shows that the calculation of the
position has been achieved after reset |
| Synchronization
time: |
Max. 1 minute in normal
operation mode, approx. 12 minutes after a cold
start (discharged buffer battery) |
|
Interface: |
Two independent serial
RS232-interfaces, menu configurable |
| Data format of
interfaces: |
Baudrate: 300, 600, 1200,
2400, 4800, 9600, 19200 Baud data format: 7N2,
7E1, 7E2, 8E1, 8N1, 8N2 Time telegram: Meinberg
Standard-Telegram, SAT, Uni Erlangen (NTP),
SPA, NMEA0183 (RMC), COMPUTIME or capture-telegramm |
| Physical
dimensions: |
485mm x 45mm x 305mm |
| Time-Trigger
inputs: |
Resolution: 100 nsec,
triggered by falling TTL slope
Time of trigger event readable via
RS232-interface |
| Antenna
connector: |
type-N connector |
| Backup battery
type: |
When main power supply
fails, hardware clock runs free on quartz basis,
almanac data is stored in RAM
Life time of lithium battery min. 10 years |
| Supported Time
String Formats: |
Meinberg Standard
Timestring, Uni Erlangen Timestring, SYSPLEX
Timer, NMEA, Computime, ABB-SPA, SAT,
Arbiter |
|
Firmware: |
Flash-EPROM, bootstrap
loader |
| Power Supply
Unit: |
Standard PSU:
85 ... 264VAC, 47 ... 63Hz
Several other power supply units (even for DC
power supply) are available upon request. |
| Form
Factor: |
19'' aluminium case (1U)
Schroff Multipac |
|
Protection: |
IP20 |
| Ambient
temperature: |
0 ... 50°C / 32 ...
122°F |
|
Humidity: |
Max. 85% |
| Scope of
supply: |
Included in delivery is our
GPS
antenna incl. converter unit, 20m GPS antenna
cable (RG58) and a printed manual. |
|
Warranty: |
Two-Year Warranty |
|
