GPS170BGT : GPS Satellite Receiver in rack mount
enclosure
|
|
Related Pages
MEINBERG: Quality Management
System 
|
Key Features
Description
The GPS170 satellite clock in 19" enclosure is the
base for all our GPS synchronized systems for 3U and
more.
The GPS170BGT consists of a power supply (input
voltage determined by the customer, outputs as
needed) and the GPS
reference clock and can be customized with
different modules and output drivers o fulfill your
needs.
For example the following outputs are
possible:
IRIG Time Code
Pulses
- pulse per second(PPS), pulse per minute (PPM),
DCF modulation marks (DCF_MARK), pulse per hour
(PPH), free programmable pulses
- as TTL, RS232, via Optokoppler,
or Relays (PhotoMos)
- via DSUB, BNC, DFK
Frequencies
- fixed frequencies, frequency synthesizer from
1Hz-10MHz, E1, T1 (telcom
frequencies)
- as sine wave, sine wave with low phase noise or
square pulse frequency
- via BNC or Twinax
Serial Interfaces
- RS232, RS422, current loop (20mA)
- via DSUB9, DSUB25, Fiber Optic ST
Network Interfaces
- NTP, PTP (IEE1588 V1 and V2), X-Port for
configuration and control (SNMP)
- via RJ-45, Fiber Optic ST, Fiber Optic SC
Please tell us the number, format and connector of
your desired configuration and we will make you an
appropriate offer.
Characteristics
| Type of
receiver: |
6 channel GPS C/A-code
receiver |
| Type of
antenna: |
Remote powered GPS antenna/converter unit, up
to 300m distance to antenna with RG58 and up to
700m distance with RG213 cable |
|
Display: |
LC-display, 4 x 16
characters |
|
Interface: |
Two independent serial
RS232-interfaces, menu configurable |
| Data format of
interfaces: |
Baudrate: 300, 600, 1200,
2400, 4800, 9600, 19200 Baud data format: 7N2,
7E1, 7E2, 8E1, 8N1, 8N2 Time telegram: Meinberg
Standard-Telegram, SAT, Uni Erlangen (NTP),
SPA, NMEA0183 (RMC), COMPUTIME or capture-telegramm |
| Physical
dimensions: |
485mm x 132mm x 290mm |
| Time-Trigger
inputs: |
Resolution: 100 nsec,
triggered by falling TTL slope
Time of trigger event readable via
RS232-interface |
| Alarm
output: |
Synchronous state of the
module, relay output (changeover contact) |
| Antenna
connector: |
type-N connector |
| Form
Factor: |
Schroff 19'' module case
(3U) |
| Ambient
temperature: |
0 ... 50°C / 32 ...
122°F |
|
Humidity: |
Max. 85% |
| Scope of
supply: |
GPS antenna/converter unit
and 20 m Cable RG58 |
|
Options: |
Additional output signals
generated by GPS170 |
| RoHS-Status of the
product: |
This product is fully RoHS
compliant |
| WEEE status of the
product: |
This product is handled as
a B2B category product. In order to secure a WEEE
compliant waste disposal it has to be returned to
the manufacturer. Any transportation expenses for
returning this product (at its end of life) have
to be incurred by the end user, whereas Meinberg
will bear the costs for the waste disposal
itself. |
|
Downloads
|
|
|
Please note that only the most recent manual
version is available for download. This manual
therefore may not be suitable for all product
versions.
- For drivers, SDKs, tools and utilities, please
check our Download
area
|
|
|
|
