GPS-BGT: GPS Satellite Receiver in rack mount enclosure


GPS clock appliance in rack mount enclosure for customized time and frequency synchronization systems.

Key Features

Warranty Period (Years): 3 RoHS-compliant



Product Description

The GPS satellite clock in 19" enclosure is the base for all our GPS synchronized systems for 3U and more.

The GPS-BGT consists of a power supply (input voltage determined by the customer, outputs as needed) and the GPS reference clock and can be customized with different modules and output drivers to fulfill your needs.

For example the following outputs are possible:

IRIG Time Code

Pulses

  • pulse per second(PPS), pulse per minute (PPM), DCF modulation marks (DCF_MARK), pulse per hour (PPH), free programmable pulses
  • as TTL, RS232, via Optokoppler, or Relays (PhotoMos)
  • via DSUB, BNC, DFK

Frequencies

  • fixed frequencies, frequency synthesizer from 1Hz-10MHz, E1, T1 (telcom frequencies)
  • as sine wave, sine wave with low phase noise or square pulse frequency
  • via BNC or Twinax

Serial Interfaces

  • RS232, RS422, current loop (20mA)
  • via DSUB9, DSUB25, Fiber Optic ST

Network Interfaces

  • NTP, PTP (IEEE 1588), X-Port for configuration and control (SNMP)
  • via RJ-45, Fiber Optic ST, Fiber Optic SC

Please tell us the number, format and connector of your desired configuration and we will make you an appropriate offer.



Characteristics

Receiver Type 12 channel GPS C/A-code receiver
Type of Antenna Included GPSANTv2 antenna with innovative downconverter technology that allows transmission routes of up to 300 m using RG58 cable, 700 m using RG213 cable, and 1100 m using H2010 Ultraflex cable
Display LC Display, 4 x 16 characters
Interface Two independent serial RS-232-interfaces, menu configurable
Serial Time String Output Baud Rates: 300, 600, 1200, 2400, 4800, 9600, 19200 Baud
Framing: 7E1, 7E2, 7N2, 7O1, 7O2, 8E1, 8N1, 8N2, 8O1
Time String Formats: Meinberg Standard Time String , SAT, Uni Erlangen (NTP), SPA, Sysplex, RACAL, NMEA0183 (RMC,GGA,ZDA), Meinberg GPS, COMPUTIME, ION, Capture String
Time-Trigger inputs Resolution: 100 nsec, triggered by falling TTL slope
Time of trigger event readable via RS232-interface
Alarm output Synchronous state of the module, relay output (changeover contact)
Antenna Connector Type-N connector
Form Factor Rackmount 3U chassis for standard 19'' racks
Physical Dimensions 485mm x 132mm x 290mm
Supported Temperature Operational: 0 - 50 °C (32 - 122 °F)
Storage: -20 - 70 °C (-4 - 158 °F)
Supported Humidity Max. 85 % (non-condensing) at 40 °C
Contents of Shipment GPS antenna/converter unit and 20 m Cable RG58
Warranty Three-year warranty
Options Additional output signals generated by the internal GPS receiver
RoHS Status of Product This product is fully RoHS-compliant.
WEEE Status of Product This product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself.


Downloads

Short Info Sheet



Manuals

  • Handbuch (deutsch) zur Zeit nicht verfügbar.
  • Manual (english) not available at current time.

Please note that only the most recent manual version is available for download. This manual therefore may not be suitable for all product versions.
Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact Meinberg Mail Contact