 |
Solutions for Time and Frequency Synchronization |
| Products | Support | Downloads | About Meinberg | Contact | Search |  |
| by Application | by Time Source | by Form Factor | Time Server | Product Archive | ||
 |
|
|
GPS Clock
 The GPS170PCI has been designed to synchronize the system time of computers with PCI/PCI-X bus interface
GPS Time Server
 The M300 uses a built-in GPS radio clock as its reference time source
Clock GPS Time
 This GPS180PEX PCI EXPRESS slot card is the best choice for adding a highly accurate time base to your servers or workstations
NTP Time Server
 M600/GPS: High End NTP Time Server with integrated GPS radio clock. It synchronizes all systems either NTP- or SNTP-compatible and uses a built-in GPS radio clock as its reference time source
IRIG Generator
 The board TCG511 has been designed for the generation of IRIG and AFNOR standard time codes MEINBERG: Quality Management System
|
Key Features
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Type of receiver: | 6 channel GPS C/A-code receiver |
| Type of antenna: | Remote powered GPS antenna/converter unit, up to 300m distance to antenna with RG58 and up to 700m distance with RG213 cable |
| Status info: | Two TTL-outputs (Lock and Fail) for handing-over the status of the receiver |
| Synchronization time: | Max. 1 minute in normal operation mode, approx. 12 minutes after a cold start (discharged buffer battery) |
| Frequency outputs: | 10 MHz: TTL into 50 ohm and sinewave 0.6 Vrms into 50 ohm Phase-locked to pulse per second (PPS) with option OCXO MQ or OCXO HQ |
| Pulse outputs: | High and low active pulses per second (PPS), TTL into 50 ohm, pulse duration 200 msec |
| Accuracy of pulse outputs: | < ± 250nsec (TCXO / OCXO LQ), < ± 100nsec (OCXO MQ / OCXO HQ) |
| Interface: | Two independent serial RS232 interfaces |
| Data format of interfaces: | Baudrate: 300 to 19200 baud Framing: 7N2, 7E1, 7E2, 8E1, 8N1, 8N2 Time String: Meinberg Standard, Meinberg GPS, SAT, Uni Erlangen (NTP), SPA, NMEA0183 (RMC), Computime |
| Physical dimensions: | 80mm x 120mm x 17,5mm |
| Electrical connectors: | Two row 26-pole (2 x 13) contact strip |
| Antenna connector: | BNC-connector |
| Power supply: | VCC (main power supply): +5 V VDD (oscillator power supply): +5 V |
| Backup battery type: | When main power supply fails, hardware clock runs free on quartz basis, almanac data is stored in RAM Life time of lithium battery min. 10 years |
| Firmware: | Flash-EPROM, bootstrap loader |
| Current consumption: | VCC: 560 mA VDD: depending on oscillator option |
| Ambient temperature: | 0 ... 50°C / 32 ... 122°F |
| Humidity: | Max. 85% |
| Options: | Different oscillators available, look at oscillator options Other frequency outputs than 10 MHz |
| RoHS-Status of the product: | This product is fully RoHS compliant |
| WEEE status of the product: | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |
Downloads
|
||
|
|
| [ Home | Products | Top ] |
|