Meinberg Radio Clocks the GPS, DCF and NTP Time Server Specialist
Solutions for Time and Frequency Synchronization
Products Support Downloads About Meinberg Contact Search Hier klicken für deutsche Seiten
by Application by Time Source by Form Factor Time Server Product Archive  
spacer

COM52HS
DCF77 radio clock for 35mm DIN mounting rail.


DCF77 radio clock with serial RS232 interface, pulse per second, pulse per minute and integrated DCDC converter for 19...72VDC operating voltage in plastic housing for DIN mounting rail.
Image Zoom Image Zoom

DCF77 radio clock with serial RS232 interface, pulse per second, pulse per minute and integrated DCDC converter for 19...72VDC operating voltage in plastic housing for DIN mounting rail.
 

End of Life Announcement

This product is not available anymore and may have been substituted by another product. Of course we continue to support existing units still in use. Please contact our support department for further details.

This product has been substituted by: DCF600HS


 
Related Pages
DCF77 Radio Clock - PCI/PCI-X Bus

The PCI511 is a DCF77 radio clock for synchronization of computers with a PCI or PCI-X slot. It receives the longwave radio time signal from the DCF77 sender located near Frankfurt/Main, Germany.
Network Time Server

The M300 time server are designed to be deployed in IPv6 networks
Time Server

Meinberg NTP Products - Time Server, PCI Cards, external Reference Clocks, Displays
Rackmount Time Server

LANTIME M600/GPS: PTPv2/IEEE 1588-2008 Grandmaster Clock and NTP Time Server with integrated GPS radio clock.
Time Synchronisation

We offer you a wide range of solutions for synchronizing networks of any size
IPV6 Time server

The M300/RDT is synchronized by any external Meinberg radio clock (Stratum 1 mode) or up to 7 external NTP time servers (Stratum 2 mode)
IRIG Time Server

The M300/TCR comes with a built-in TCR module which decodes a IRIG/AFNOR signal from any compatible time code generator.
Timecode Reader

The TCR51USB is a Timecode Reader in a compact plastic housing - decodes IRIG modulated and unmodulated

MEINBERG: Quality Management System

Certified by DQS Certified by IQNET

Key Features
DCF77 radio clock for 35mm DIN mounting rail.

  • 3 Years Warranty RoHS compliant
  • Internal DCDC converter for 19..72VDC operating voltage
  • Pulses per second and per minute
  • RS232 interface
  • Receiver status LEDs
  • DCF77 radio clock


Description
DCF77 radio clock for 35mm DIN mounting rail.


RS232 interface via 9 pin SUB-D female connector. Pulse per second and pulse per minute. These pulses are accessable via the ten pole screw terminal.

RS232 Output
An asynchronous serial port can be used to transmit information on date and time to other devices. The clock is configured to send time messages automatically with 9600 baud and with a framing of 7E2 once per second.

Pulse Output
After DCF77 synchronization, a pulse per minute and a pulse per second, with a pulse duration of 0.2 seconds, will be switched on. The generation of the pulses will be maintain for 12 hours if the DCF77 receipt is disturbed. Thereafter the pulses will be deactivated.

Housing
The receiver module is mounted in a plastic housing for 35mm DIN mounting rails. Two status LEDs (for modulation and free-running mode), the BNC antenna connector and a D-SUB9 connector for the serial RS232 interface are integrated in the front side of the housing.

Operating Voltage
The system requires an operating voltage of 19...72V/DC witch is applied via two contacts of the integrated screw terminal. The receiver is DC isolated due to an internal DCDC converter, the isolation voltage is 1,5KV DC.



Back to Top


Characteristics
DCF77 radio clock for 35mm DIN mounting rail.


Type of receiver: Narrowband straight receiver with automatic gain control, Bandwidth: approx. 40Hz
Type of antenna: Scope of supply includes an active ferrite antenna AI01 and 5m of RG174 coaxial cable with BNC male connectors. Optional: AW02 with RG58, other length of cable
Status info: Modulation visualized by LED. Free running state visualized by LED after switching to free running quartz clock mode
Reception Control: Multiple check of received time telegram
Plausibility control by using two complete time telegrams
Pulse outputs: Pulse per second and pulse per minute (optocoupler), pulse width: 200 msec
Interface: Single serial RS232 interface
Data format of interfaces: Baudrate: 9600 baud
Framing: 7E2
Output string: 32 ASCII characters with date, time and status information
Physical dimensions: 73,2mm x 45mm x120mm (width x height x depth)
Electrical connectors: 9 pin sub D female connector
BNC female connector
10 pole screw terminal for connecting the pulse outputs and the power supply
Power supply: 19....72VDC
Current consumption: approx. 100mA
Form Factor: Dold Enclosure type KO4762, IP40 protected
Ambient temperature: 0 ... 50°C / 32 ... 122°F
Humidity: Max. 85%
Options: Driver software for Windows XP®, Windows 2000®, Windows NT®, Novell and UNIX (NTP Freeware)
RoHS-Status of the product: This product is fully RoHS compliant
WEEE status of the product: This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself.

Back to Top


Downloads
DCF77 radio clock for 35mm DIN mounting rail.

 
PDF Documents Please note that only the most recent manual version is available for download. This manual therefore may not be suitable for all product versions.

Software Downloads

  • For drivers, SDKs, tools and utilities, please check our Download area
  




spacer
 [ Home  | Products  | Top  ]
spacer
Meinberg Funkuhren GmbH & Co. KG
Lange Wand 9
D - 31812 Bad Pyrmont		Contact
Phone: +49 (0) 52 81 / 93 09 - 0
Facsimile: +49 (0) 52 81 / 93 09 - 30		Legal Notice and Privacy Policy | Sitemap
Homepage: http://www.meinberg.de
E-Mail: info@meinberg.de
radio clock DCF77 Meinberg COM52HS seriell