NTP Display ANZ14/NET

Solutions for Time and Frequency Synchronization

Products	Support	Downloads	About Meinberg	Contact	Search
by Application		by Time Source	by Form Factor	Time Server	Product Archive

ANZ14/NET : Network Time Display

Image Zoom		Time and Date Display with NTP synchronized Reference ANZ14/NET is a LED display with network (Ethernet) connection. It was designed to display the time (hours, minutes and seconds) as well as the date (day, month, year and day of the week). The free running clock is beeing synchronized cyclic via the network connection (RJ45 10/100MBit) by a NTP time server using the Network Time Protocol.

Key Features

Slave Clock/Display for LANTIME Time Servers
Good visible LED Display for Time, Date and Day-of-the-Week
RS232/20mA Interface
Buffered hardware clock
Integrated Power Supply (100 - 240V AC or DC)

Description

The UTC time sent by the NTP server is converted into the users local time by configurable parameters and displayed correspondingly. A dot in the LED display and/ or a numerical error code indicates a malfunction. Configuration occurs via network using a Telnet connection. The ANZ14/NET is a stand-alone free running clock with integrated power supply that is synchronized via network connection using NTP. The 14-digit LED display shows time, date and day-of-week. The display brightness is variable. A serial time string is generated either once per second or once per minute. Baudrate and framing are set to 9600 baud, 8N1. This configuration must not be changed.

Option DIS14/NET with green Display and brightness adjustment
The front panel of the DIS14/NET contains three push buttons. Pressing the button "Mode" for at least two seconds enables the setup menu (LED "Setup" is switched on). This menu allows the configuration of the features provided by the DIS14/NET. All available sub menus are selected by the "Mode" push button while both "Brightness" push buttons (+ and -) are used to set the value or to select the available options.

Characteristics

Display:	12 numeric LED digits for time and date 2 alphanumeric LED digits for day of the week 14mm/13mm character height (time/date), variable brightness Modulation indicated by LEDs Setup menu for configuration
Interface:	One serial RS232/20mA output, configurable by menu Baudrate: 9600 baud Framing: 8N1 1 x 20mA current loop output, passive Output Strings: Meinberg Standard Time String, Atis or SAT-String
Electrical connectors:	9pin SubD female connector RJ-45 Network connector power cord receptacle
Power supply:	100 - 240VAC (50 - 60Hz), 100mA or 9 - 36VDC, 500mA or 18V - 72VDC, 250mA or 120V - 240VDC, 100mA (please specify with the order)
Backup battery type:	When main power supply fails, hardware clock runs free on quartz basis, life time of lithium battery min. 10 years
Form Factor:	Aluminium stack case (optional: black anodised) height x width x depth (72mm x 144mm x 132mm), for cutouts of 140mm x 68mm
Ambient temperature:	0 ... 50°C / 32 ... 122°F
Humidity:	Max. 85%
Scope of supply:	ANZ14/NET Display, power cable, USB Flash Drive with manual and Meinberg software
RoHS-Status of the product:	This product is fully RoHS compliant
WEEE status of the product:	This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself.