ANZ141: High-Accuracy Time & Date at a Glance
Key Features
- Synchronization with network-based NTP server, PTP master, or external time string in a variety of formats
- High-clarity LED display with ten brightness levels
- Two serial Interfaces (RS-232 / RS-422)
- Buffered hardware clock
- Three available Model Variants
- ANZ141 - synchronized with time string via serial RS-232 or RS-422 interface
- ANZ141/NET - synchronized via network with NTP server or PTP master clock
- ANZ141/DCF - with built-in DCF77 receiver and connector for indoor or outdoor antenna
- AC or DC power supply
- Ease of configuration using the free Meinberg Device Manager tool
-
Previous Models - ANZ141:
ANZ14 :: LED Display with DCF77 Radio Clock Option (ANZ14/DCF77)
ANZ14/NET :: Network Time Display
Product Description
Network Connectivity
The ANZ141/NET features a physical interface that allows the device to be easily connected to any IP network. The network interface enables not only for communication with the NTP server or PTP master but also serves as an additional management interface for communication with the free Meinberg Device Manager Tool.
NTP Support
The ANZ141/NET provides NTPv4 client functionality with a full software implementation to allow it to acquire the time from a defined NTP server.
IEEE 1588 PTP Support
The ANZ141/NET provides a software-level PTP slave interface to allow it to synchronize to a PTP master.
Management
The ANZ141/NET is managed over a serial or network connection using the free management and monitoring tool Meinberg Device Manager.Characteristics
Supported PTP Profiles | IEEE 1588-2008 Profiles:
|
Available PTP Modes | Clock Modes:
|
Network feature | Network Protocols: IPv4 (with DHCP support) VLAN tagging with PCP QoS SNMPv1 for monitoring |
Accuracy | 1 E-6 (while powered on and after 24 hours of synchronous operation)
3 E-5 (while powered off and running off internal capacitor or optional lithium battery) |
Display | 14-digit alphanumeric LED display for time and date 12 digits as 8-segment units, 2 digits as 14-segment units 14 mm / 13 mm character height (time / date) Brightness adjustable in 8 levels Modulation indicated by LEDs Setup and menu buttons for configuration Operable in free-run mode without reference source or when reference source is temporarily lost |
Interface | Two serial Interfaces: RS-232 / RS-422 Baud Rates: 2400, 4800, 9600, 19200, 38400, 57600, 115200 Baud Framing Options: 7N2, 7E1, 7E2, 8N1, 8N2, 8E1 RS-422 Out via COM 0; RS-422 In via COM 1 Output Strings: Meinberg Standard, SAT, NMEA RMC, NMEA GGA, NMEA ZDA, NMEA RMC GGA (RMC followed by GGA), Uni Erlangen, Computime, Sysplex 1, SPA, RACAL, ION, ION Blanked, IRIG-J-1, ATIS, 6021, Freelance Reference Strings: Meinberg Standard, Uni Erlangen, ATIS, SAT, Computime |
Electrical Connectors | Two 9-pin SubD female connectors (COM0 / COM1) RJ-45 Network connector (ANZ141/NET only) Antenna connection via BNC female (ANZ141/DCF only) IEC mains plug (AC power supply) 3-pin MSTB (DC power supply) |
Backup Battery Type | When main power supply fails, hardware clock runs free on quartz basis, life time of lithium battery min. 10 years |
Operating Voltage |
AC Power
Connector Type: IEC 60320 C13 (“Kettle lead”)
Nominal Input Voltage Range (UN): 100 - 240 V AC Rated Input Voltage Range (Umax): 85–264 V AC Nominal Current (IN): 0.15 A Nominal Frequency Range (fN): 50 - 60 Hz Rated Frequency Range (fmax): 47–63 Hz Maximum Output Power (Pmax): 15 W Maximum Heat Output: 51.19 BTU/h DC Power Connector Type: 3-pin MSTB Nominal Input Voltage Range (UN): 48 V DC Rated Input Voltage Range (Umax): 20–60 V DC Nominal Current (IN): 0.22 A Maximum Output Power (Pmax): 10 W Maximum Heat Output: 34.13 BTU/h (please specify with your order) |
Form Factor | Enclosure Material: Extruded aluminum case Dimensions: 144 mm x 72 mm x 132 mm (W x H x D) Control Panel Cutout: 140 mm x 68 mm (W x H) |
Supported Temperature | Operational: 0 - 50 °C (32 - 122 °F)
Storage: -20 - 70 °C (-4 - 158 °F) |
Supported Humidity | Max. 85 % (non-condensing) at 40 °C |
Warranty | Three-year warranty |
RoHS Status of Product | This product is fully RoHS-compliant. |
WEEE Status of Product | This product is handled as a B2B (Business to Business) category product. To ensure that the product is disposed of in a WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself. |
Downloads
Short Info Sheet
Manuals
- Handbuch (deutsch) zur Zeit nicht verfügbar.
- Manual (english) not available at current time.
Please note that only the most recent manual version is available for download. This manual therefore may not be suitable for all product versions.
- For drivers, SDKs, tools and utilities, please check our Download Section