| |
Product |
Function |
Outputs |
|
UA32S : DCF77 Radio Clock
RS232 Port Extension
.../UAT/...
|
DCF77 Radio Clock UA32S with RS232 interface
|
3 relay outputs with 50 watt safe load and 4 optocoupler outputs.
|
|
TXD8AL
RS232 Port Extension
.../TXD/...
|
Additional parallel-wired RS232 outputs, cascadable
|
D-SUB25 or D-SUB9 female connectors for shielded data lines
|
|
TXD422
RS232 Port Extension
.../TXS/...
|
Additional parallel-wired RS422 outputs, cascadable
|
D-SUB25 or D-SUB9 female connectors for shielded data lines
|
|
LWLCOM
Fiber Optic Converter
.../LWC/...
|
Converts independent
RS232 interfaces (TxD and RxD) in fiber optic, for distances of up to 2000m
|
FH-ST connectors for
GI 50/125µm or GI 62,5/125µm gradient fibre (2 transmitters, 2 receivers)
|
|
LWL4T
Fiber Optic Converter
.../LWT/...
|
Converts RS232 (TxD) or TTL outputs in fiber optic, for distances of up to 2000m
|
FH-ST connectors for GI 50/125µm or GI 62,5/125µm gradient fibre (4 transmitters)
|
|
SIM77PV4
DCF77 Simulator
.../SIM/...
|
Generates together with a preconnected GPS or PZF radio clock a DCF77 compatible signal
|
Coax female connectors (BNC) for direct connection of DCF77 radio clocks
|
|
SCU-XPT
Switchcard
.../SCU/...
|
Switchcard for redundant GPS-based time synchronization solutions
|
Switches outputs automatically between two GPS radio clocks,
only internally wired
|
|
LANCPU
NTP Timeserver
.../LAN/...
|
Singleboardcomputer with Linux operating system, original NTP software, HTTP server, FTP, Telnet, DHCPC, SNMP-Traps, SSH
|
RJ45 connector with Link-/Activity and 10/100 MBit LED, D-SUB9 connector for Terminal
|
|
LNE
Network Expansion for Lantime Timeserver
.../LNE/...
|
Meinberg Lantime expansion for two additional independant network connections
(with Lantime/.../BGT up to three)
|
Up to three RJ45 connectors with Link-/Activity and 10/100 MBit LEDs for each connector
|
|
LANXPT
Ethernet - Interface Module
.../LXP/...
|
Converts the first serial port (COM0) of a GPS170 receiver into an Ethernet port
|
One RJ45 connector with link-/activity LEDs
|
|
TCG511
IRIG or AFNOR time code generator
.../TCG/...
|
Generates together with a radio clock modulated (sine wave) and unmodulated (TTL, RS232, RS485) IRIG A/B, AFNOR or IEEE time codes
|
Up to four Coax female connectors (BNC) or D-SUB9 female connectors
|
|
TCV5
Diplexer for IRIG A/B
.../TCV/...
|
Splits an IRIG A/B time code to five outputs
|
Coax female connectors (BNC)
|
|
TCW8
Output Level Check for IRIG A/B
.../TCV/...
|
Supervision of the output voltage of up to eight IRIG A/B time code signals
|
None, only internally wired
|
|
TCR511
IRIG Time Code Receiver
.../TCR/...
|
Generates a serial timestring and DCF77 time marks as well as pulses per second from an incoming IRIG A/B signal
|
2 serial interfaces (configurable), DCF time marks, pulses per second, 4 TTL- and 4 optocoupler outputs
|
|
OCTBUF
TTL Pulse Diplexer
.../OCT/...
|
Additional TTL pulses, (PPS, PPM, 10MHz etc.) TTL via 50Ohm
|
Coax female connectors (BNC)
|
|
RELAQV
Relay Outputs
.../AQV/...
|
Additional conventional relay outputs (changeover contact) or Photo-MOS relays (make contact)
|
3-pin Phönix connectors (DFK)
|
|
RECT2048
Level Converter
.../REC/...
|
Converts an incoming sine wave signal from a GPS170 into a TTL level signal
|
Coax female connector (BNC)
|
|
LIU
Line Interface Unit
.../LIU/...
|
Generates together with a preconnected GPS radio clock several output signals for telecom applications
|
Female BNC-connectors for unbalanced outputs, BNC-Twinax-connectors for balanced outputs
|
|
FO40BGT
Fiber Optic Diplexer
.../FO/...
|
The Fiber Optic Diplexer FO40BGT splits one optical 850nm input signal into 40 outputs
|
Optical ST connectors for input and outputs. These connectors are suitable for optical GI50/125µm or GI62.5/125µm multimode gradient fibers
|
|
SDU
Signal Distribution Unit for PPS, 10MHz and IRIG Signals
.../SDU/...
|
The SDU base chassis can be ordered with one or two distribution modules, each multiplying either TTL/IRIG DCLS or IRIG AM signals
|
Female BNC-connectors, 3-pin Phönix connectors (DFK)
|
|
Option 1 for GPS70
COM2/3
.../ZRS/...
|
Optional software extension of a GPS170 module, enables two additional serial ports
|
2 x D-SUB female connectors for shielded data lines
|
|
Option 2 for GPS170
programmable Outputs
.../PSA/...
|
Optional software extension of a GPS170 module, enables three programmable switching outputs
|
3 x switching outputs (TTL)
|
|
|
Option 3 for GPS170
time code Output
.../ZTC/...
|
Optional software/hardware extension of a GPS170 module, enables an IRIG time code output
|
1 x Coax BNC connector for modulated (3Vpp) & 1 x D-SUB connector for unmodulated (TTL) time code output
|
